Documents by Year

1930s (70)

1940s (34)

1950s (98)

1960s (256)

1970s (224)

1980s (1012)

1990s (1015)

2000s (10448)

2010s (18443)

2020s (360)

2020 (360)

Other norms

«
1
2
3
4
…
32
»

AST ISO 9001-2009

Quality Management System. Requirements

A typical program for the operational control of the state of the base metal and welded joints of equipment and pipelines of nuclear power plants with VVER-1000 RP during operation

Electric furnaces

Price: $132.66

Water supply and canalisation constructions

Price: $1,218.69

FR 1.29.2009.06689

Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks

FR 1.31.2009.05394

Quantitative chemical analysis of soils. Methodology for measuring the mass fraction of moisture in solid and liquid wastes of production and consumption, soils, sediments, sludges, activated sludge, bottom sediments by gravimetric method

FR 1.31.2009.06190

Quantitative chemical analysis of water. Method for measuring mass concentrations of magnesium, calcium and strontium in drinking, natural and waste waters by atomic absorption spectrometry

FR 1.31.2009.06204

Quantitative chemical analysis of water. Method for measuring mass concentrations of 2,4-dichlorophenoxyacetic acid (2,4-D) by gas chromatography in samples of drinking, natural and wastewater

FR.1.27.2009.05740

MVI determination of the spreadability of radioactive cement mortars by linear measurements using the instrument Cone AzNII KR-1 [Amended by letter No. SP-600 dated February 17, 2010], [Amended according to the letter of GUP MosNPO Radon Ref . No. 11-165/

FR.1.27.2009.06185

MVI 02-2009 MVI cigar thickness and cigaril

FR.1.27.2009.06186

MVI 01-2009 MVI fine-cut tobacco and pipe tobacco fiber width

FR.1.27.2009.06303

Analysis of the microstructure and phase composition of the nanocrystalline adhesion zones of heterogeneous

FR.1.27.2009.06304

Control of the geometrical sizes of particles of synthesized nanopowders (scanning double-beam electron-ion microscope Quanta 200 3D FEG)

FR.1.27.2009.06305

Control of the geometric dimensions of carbide particles in austenitic nitrogenous steels (transmission electron microscope Technai S-Twin G2 30)

FR.1.27.2009.06306

Method for microanalysis of the elemental composition of the structural components of austenitic nitrogenous steels by spectroscopy of characteristic electron energy loss

FR.1.27.2009.06307

Certification of the nanocrystalline state of foils from technically pure materials Ti, Ni, Al, Cu, Nb and titanium alloy VT6 (Quanta 200 3D FEG two-beam electron-ion microscope)

FR.1.27.2009.06308

X-ray spectral local microanalysis of the elemental composition of the structural components of materials (a Quanta 200 3D FEG scanning electron beam microscope equipped with an EDAX Apollo X-ray energy dispersive spectrometer)

FR.1.27.2009.06358

Guidelines. "GSI. Inspection work in the manufacture, installation and installation of products and spetsustroystv ship"

FR.1.27.2009.06565

MVI "Identification of the local phase composition using an analyzer of diffraction patterns of back-reflected electrons with locality up to 20 nm. (For a raster two-beam electron-ion microscope Quanta 200 3D FEG, serial number D8610)"

FR.1.27.2009.06595

Measurement technique Automated measurement of the coordinates of a two-dimensional arrangement of a large set of equivalent nano-objects on the substrate surface "(Philips XL-40 raster electron microscope or equivalent., Equipped with a precision table)

FR.1.27.2009.06694

Methods of measuring the surface roughness of samples by atomic force microscopy method Code SOLVER

FR.1.27.2009.06708

Method for measuring the parameters of the lattice parameters of carbon nanotubes of the “armchair” and “zigzag” types using X-ray structural analysis

FR.1.27.2009.06710

Methods for measuring the structural characteristics of nanomaterials from microphotographs of samples

FR.1.27.2009.06714

Measurement Technique for X-ray Structures and X-Ray Phase Characteristics of Powder Materials

FR.1.27.2009.06761

Technique for measuring the geometrical dimensions of nanoparticles using transmission electron microscopy

FR.1.27.2009.06762

Methods of measuring particle sizes in suspensions, emulsions, aerosols in the nanometer and colloidal ranges using the effect of dynamic light scattering

FR.1.27.2009.06763

Methods of measuring the thickness of thin (from 10 nm) coatings (films, layers) by scanning electron microscopy on cross sections prepared using an ion beam

FR.1.27.2009.06764

Methods for measuring the spatial resolution of scanning, probe microscopes

FR.1.28.2009.05738

MWI RW-based cement compounds. Determination of tensile strength on a tensile testing machine brand IR-5047-50S. Amended by letter number SP-600 dated 02/17/2010

FR.1.28.2009.05739

MVI determination of the density of cement mortar by the express method using lever weights. [Amended by letter No. SP-600 dated February 17, 2010], [Amended according to the letter of GUP MosNPO "Radon" Ref. No. 11-165/12 of 15.11.12.], [Amendments were

FR.1.28.2009.06189

Mass of oil and oil products. MVI direct method of static measurements by weighing on the weights of disengaged tanks at the glass depot "Lukoil-Severo-Zapadnefteproduct"

FR.1.28.2009.06227

Elements of NPP equipment. MVI mechanical stresses resulting from technological effects, the method of acoustoelasticity

FR.1.28.2009.06310

Recommendation. GSE. MVI determination of the coordinates of the projection of the center of gravity of the object using weights for static weighing performed according to GOST 29329

FR.1.28.2009.06318

MVI mass fraction of loss on ignition of crystalline zeolites NaA, NaX

FR.1.28.2009.06319

MVI mass fraction of the target silica gel carrier for alcohol synthesis

FR.1.28.2009.06320

MVI reject analysis (mass fraction of defective granules) silica gel carrier for the synthesis of alcohol

FR.1.28.2009.06321

MVI measurements of the strength of whole granules of silica gel carrier for the synthesis of alcohol

FR.1.28.2009.06326

MVI mass fraction of loss on ignition of the crumb of synthetic zeolites

FR.1.28.2009.06525

MVI mechanical strength of catalysts and carriers

FR.1.28.2009.06709

Measurement Technique for Ground Testing for Strength

FR.1.28.2009.06713

Methods of measuring the mechanical properties of metallic materials by tensile testing method

FR.1.29.2009.05052

Recommendation. GSE. Mass of petroleum products. MVI in railway tanks at OJSC "Bashkirnefteprodukt"

FR.1.29.2009.05053

Recommendation. GSE. Mass of petroleum products. MVI in railway tanks at JSC "Ufaneftekhim"

FR.1.29.2009.05406

GSI Recommendation. Density of oil. MVI areometer in the chemical-analytical laboratory when conducting accounting operations on a backup accounting scheme for SIKN 268 PSP "Hacksaw" LLC "Lukoil-Perm"

FR.1.29.2009.05407

GSI Recommendation. A lot of oil. MVI system of measuring the quantity and quality of oil number 619 PPSN "Kaltasy" JSC "ANK" Bashneft "

FR.1.29.2009.05415

GSI Recommendation Mass of oil MVI system for measuring the quantity and quality indicators of oil No. 501 at the Nizhnevartovsk Central Commodity Park of the Samotlor Field

FR.1.29.2009.05416

Recommendation "GSI. Density of oil. MVI with a hydrometer in the unit for measuring indicators of oil quality during accounting operations at SIKN No. 566 PSP Talakanskoe" Verkhnechon-skneftegaz "

FR.1.29.2009.05417

Recommendation "GSI. Density of oil. MVI of oil density with a hydrometer in the chemical analytical laboratory (HAL) during accounting operations at SIKN No. 268 PSP" Hacksaw "Lukoil-Perm LLC

«
1
2
3
4
…
32
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!