Documents by Year
1940s (4)
1950s (25)
1960s (167)
1970s (14403)
1980s (40474)
1990s (14045)
2000s (407)
2010s (28)
Other (91)

TU

TU 2-041-0221569-016-90
TU 2-041-0221569-016-90
Combination press-scissors, strip thickness 28x200 mm, version 3, model 5224B
TU 2-041-0221637-011-90
TU 2-041-0221637-011-90
Single-crank single-action presses open non-oblique mustaches. 400 KN and 630 kN, version 3. Models KD2126L, KD2128L
TU 2-041-0222049-10-90
TU 2-041-0222049-10-90
Pneumatic balancers for a nominal pressure of 1.0 MPa (10 kgf/cm2)
TU 2-041-0222447-197-90
TU 2-041-0222447-197-90
Rotary conveyor lines for injection molding of thermoplastic materials with an injection volume of up to 1 cm3
TU 2-041-0222447-201-90
TU 2-041-0222447-201-90
Rotary conveyor lines for injection molding of thermoplastic materials with an injection capacity of up to 2.5 CM3
TU 2-041-0223697-001-90
TU 2-041-0223697-001-90
Devices correctly unwinding for a tape up to 160 wide; 250 mm. PU160M models; PU250M
TU 2-041-0223754-40-90
TU 2-041-0223754-40-90
Single-stand hydraulic press with individual drive, force 40 kN, model П6316А
TU 2-041-0224617-007-90
TU 2-041-0224617-007-90
The automatic machine is universal, diameter of a wire is 3, 2 mm. Model AB7215
TU 2-041-0224879-11-90
TU 2-041-0224879-11-90
Semiautomatic special rewinding machines for rewinding of thoriated tungsten wire. Models SPP-0, 05B (OP57); SPP-0, 2B (OP5701)
TU 2-041-0224879-17-90
TU 2-041-0224879-17-90
Special semi-automatic drawing machines for the production of thoriated tungsten round products. models SVP-0.4B (OP59), SVP-0.6B (OP5901), SVP-0.5B (OP5904), SVP-0.3B (OP5902), SVP-0, 15B (OP5903), SVP-0.035B (OP5905), SVP-0.07B (OP5906), SVP-0.025B (OP5
TU 2-041-0225144-3-90
TU 2-041-0225144-3-90
The line mechanized for the production of a corrugated base with a diameter of 1.6 ... 6.0 mm. Model L331.42.200
TU 2-041-0225144-4-90
TU 2-041-0225144-4-90
The line is mechanized for assembling a grid of corrugated wire with a diameter of 1.6 ... 6.0 mm. Model L331.43.200
TU 2-041-4611022-007-90
TU 2-041-4611022-007-90
Switches contactless trailer models С144.11, С144.12, С144.13, С144.14, С144.15, С144.16, С144.17
TU 2-041-4611022-011-90
TU 2-041-4611022-011-90
Control device for cyclic industrial robots and robotic complexes. Model С171.21
TU 2-041-4611127-016-90
TU 2-041-4611127-016-90
Single-position machine for injection molding of thermoplastic materials with a force of 4000 kN, model D3136-1000
TU 2-041-4611127-017-90
TU 2-041-4611127-017-90
Hydraulic press for cold extrusion of relief cavities, force 10,000 kN. Model P7640A
TU 2-041-4611127-018-90
TU 2-041-4611127-018-90
Special hydraulic press for pressing abrasives of 6.3 MN (6300 kN). Model DB0638
TU 2-041-5748123-003-90
TU 2-041-5748123-003-90
Automatic sheet metal stamping multi-force 1000 kN. Model AB6130
TU 2-041-5748186-390-90
TU 2-041-5748186-390-90
Single-crank double action press closed, force 3150/2000 kN, model KB5535
TU 2-041-5748186-402-90
TU 2-041-5748186-402-90
Press crank-knee embossing, force 25,000 kN. Model КВ8044
TU 2-041-5748254-287-90
TU 2-041-5748254-287-90
Single-crank single-action open press of 1000 kN. Model KD2130B
TU 2-041-5748254-288-90
TU 2-041-5748254-288-90
Closed forging rollers, center distance 500 mm model C1037B
TU 2-041-5748584-005-90
TU 2-041-5748584-005-90
Hydraulic profile press with a force of 12,500 kN. Model PB8841
TU 2-041-5748631-007-90
TU 2-041-5748631-007-90
Single-column hydraulic press with a force of 1600 kN. Model ПБ6332Б
TU 2-041-5748631-008-90
TU 2-041-5748631-008-90
Single-rack hydraulic presses with a force of 2500 kN of models PB6334, PB6334-01
TU 2-041-5748631-010-90
TU 2-041-5748631-010-90
Hydraulic presses for the manufacture of plastic products, force 400, 630, 1000, 1600, 2500, 4000 kN. Models DE2426, DE2428, DE2430, DE2432, DE2434, DE2436
TU 2-041-5748631-011-90
TU 2-041-5748631-011-90
Automatic complexes for the manufacture of products from thermosetting plastic powder with a force of 630, 1000, 1600 kN
TU 2-041-5748631-012-90
TU 2-041-5748631-012-90
Automatic complexes for the manufacture of articles from thermo-plastic tableted plastics an effort of 630, 1000, 1600 kN. Models AKDE2428.31, AKDE2430.31, AKDE2432.31
TU 2-041-5748652-114-90
TU 2-041-5748652-114-90
Automatic cold-stamping five-position for nuts M6. Model AB1818B
TU 2-041-5748652-122-90
TU 2-041-5748652-122-90
Automatic cold-stamping five-position for nuts M12. Model AB1821B
TU 2-041-5748652-124-90
TU 2-041-5748652-124-90
Four-position automatic cold-forging machines for rod-type fasteners with a diameter of 6 and 12 mm. Models AV1918D, AV1921D
TU 2-041-5748652-141-90
TU 2-041-5748652-141-90
Chain-welding machine, diameter of chain steel 5 ... 10 mm. Model A8220
TU 2-041-5748652-142-90
TU 2-041-5748652-142-90
Automatic roll-rolling two-roll, force 63 kN. Model A9518B
TU 2-041-5748694-06-90
TU 2-041-5748694-06-90
The automatic machine for briquetting brown coal, effort 2500 kN. Model 2PSHB-2, 5-210 F1
TU 2-041-5748694-07-90
TU 2-041-5748694-07-90
Hydraulic press for friction asbestos products, force 5000 kN
TU 2-041-5748694-08-90
TU 2-041-5748694-08-90
Four-roll hydraulic sheet bending machine for 25x3150 mm sheet
TU 2-041-5759271-001-90
TU 2-041-5759271-001-90
The complex is automated for editing and polishing rods on a two-roll machine, the diameter of the rods is 12-110 mm. Model AKI5529A.01
TU 2-041-5759271-002-90
TU 2-041-5759271-002-90
Automatic line for longitudinal cutting of coiled steel 0.5-4x1600 mm. Model L118.41.100
TU 2-041-5759271-003-90
TU 2-041-5759271-003-90
Special scissors with inclined knife 4x1600 mm. Model L118.41.111
TU 2-041-5759271-004-90
TU 2-041-5759271-004-90
Multidisk special scissors 4x1600 mm. model Л118.41.112
TU 2-041-5759271-005-90
TU 2-041-5759271-005-90
Scissors rotor special 4x30 mm model L118.41.113
TU 2-041-5759271-006-90
TU 2-041-5759271-006-90
Special coil for coiled steel 4x1600 mm
TU 2-041-5759271-007-90
TU 2-041-5759271-007-90
Multidisk special scissors 1,6x1600 mm. Model L118.41.115
TU 2-041-5773008-002-90
TU 2-041-5773008-002-90
The press machine of cutting cutting high-speed force 250 kN. Model АА6324
TU 2-041-5773008-003-90
TU 2-041-5773008-003-90
Rotary forging machines with roller feed, forces 200 kN; 500 kN; 800 kN, model B2123.01; B2127.01; B2129.02; rotary forging machine, force 800 kN, model B2129.01
TU 2-041-5806846-002-90
TU 2-041-5806846-002-90
Control device complete of models C133.82 and C133.83
TU 2-041-5806846-004-90
TU 2-041-5806846-004-90
Multi-channel microprocessor temperature controller. Model C137.11
TU 2-041-ED1-115-90
TU 2-041-ED1-115-90
Double-crank presses closed with simple action with a force of 2500 kN, 3150 kN of models KB3534A, K3535A

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!