Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
Сборочные единицы стальных трубопроводов на Ру <= 10 МПа (100 кгс/см2) комплектных технологических линий. Общие технические условия
Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"
The standard applies to the assembly units of steel pipelines of complete technological lines intended for the transportation of liquid and gaseous substances with different physicochemical properties at a temperature not lower than minus 70 degrees. Celsius and nominal pressure up to 10 MPa (100 kgf
Стандарт распространяется на сборочные единицы стальных трубопроводов комплектных технологических линий, предназначенные для транспортирования жидких и газообразных веществ с различными физико-химическими свойствами при температуре не ниже минус 70 град. Цельсия и условным давлением до 10 МПа (100 кгс/см2) в нефтяной, газовой, химической и других отраслях народного хозяйства, в том числе на технологические трубопроводы пара и горячей воды. Стандарт не распространяется: на магистральные трубопроводы; трубопроводы, транспортирующие кислород и сжиженные инертные газы; трубопроводы специального назначения (атомных установок) и другие трубопроводы, требования к которым устанавливаются отдельными нормативными документами, утвержденными в установленном порядке.
Format: Electronic (pdf/doc)
Approved: Concern Himneftemash,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Industry Standards and Specifications »
Industry standards »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G43 Machines and equipment for oil producing, oil refining and gas industry »
National Standards for OKSTU »
INDUSTRIAL PIPELINE FITTINGS AND GATE VALVES »
Industrial pipeline steel fittings (including gate valves) »
As a Replacement Of:
OST 26-2071-79: Pipeline steel pipe assemblies for PN 10 MPa (100 kgf/cm2), for complete process lines. Specifications
The Document References:
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10543-82: Surfacing steal wire. Specifications
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11069-2001: Primary aluminium. Grades
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 17374-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Types and main parameters
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17769-83: Fastening details. Rules of acceptance
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19.402-78: Unified system for program documentation. Program description
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 19537-83: Gun grease. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19983-74: Base-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 20072-74: Heat-resistant steel
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 22042-76: Studs for smooth hole parts. Product grade B. Construction and dimensions
GOST 2246-70: Welding steel wire. Specifications
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24297-87: Input inspection of products. General provisions.
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 26294-84: Normal and high precision renewable jig bushes. Design and dimensions
GOST 26388-84: Welded joints. Test methods on resistance to cold crack formation under fusion welding
GOST 26389-84: Welded joints. Test methods on resistance to shrinkage crack formation under fusion welding
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28759.8-90: Metal gaskets of octagonal cross-section
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3242-79: Welded joints
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9.903-81: Unified system of corrosion and ageing protection. High-strength steels and alloys. Accelerated test methods for corrosion cracking
GOST 9.905-82: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
GOST 9.907-83: Unified system of corrosion and ageing protection. Metals, alloys, metallic coatings. Methods for removal of corrosion products after corrosion tests
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions
GOST 9087-81: Welding melted fluxes
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9486-79: Measuring ac bridges
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OST 26-11-10-93: Welded joints. X-Ray TV testing method.
OST 26-2004-83: Hatches for welded steel vessels and apparatus. Design .
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
RD 26-02-62-98: Stressing calculation of vessels and apparatus components, operating in aggressive corrosive hydrogen sulphide-containing medium.
RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.
RD 26-11-08-86: Welded Joints. Mechanical Tests
RD 26-11-20-88: Reliability of Machinery for Chemical and Petroleum Industries. System for Quality Control and Operational Reliability Assessment of Machinery. Control of Standardized Properties of Custom-Made and Limited-Production Products
RTM 26-44-82: Heat treatment of petrochemical equipment and its parts
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 3.05.05-84: Processing equipment and process pipelines
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т
The Document is Referenced By:
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
Customers Who Viewed This Item Also Viewed:
Special railway rolling stok. Dynamic and strength testing procedures
Blanks for marine shafts and rudder stocks. Specifications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.