imgalt

OST 26-01-1512-76

ОСТ 26-01-1512-76

Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements

Компенсаторы линзовые осевые на Ру <= 2,5 МПа (25 кгс/см2). Технические требования

Status: Not effective

The standard applies to axial lens compensators with a nominal diameter of 100 to 5000 mm and a residual pressure of 0.67 kPa (5 mmHg) to a nominal pressure of 2.5 MPa (25 kgf

Стандарт распространяется на компенсаторы линзовые осевые с условным диаметром от 100 до 5000 мм, остаточным давлением от 0,67 кПа (5 мм рт. столба) до условного давления 2,5 МПа (25 кгс/см2), температурой эксплуатации от минус 70 градусов Цельсия до плюс 700 градусов Цельсия, предназначенные для компенсации температурных и механических перемещений трубопроводов, сосудов и аппаратов, эксплуатируемые с неагрессивными или мало-, среднеагрессивными жидкими и газообразными средами с различными физико-химическими свойствами и применяемые в химической, нефтехимической, нефтеперерабатывающей и других отраслях промышленности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: All-Union Industrial Association, 12/30/1976

SKU: RUSS105157


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »


The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 3242-79: Welded joints

GOST 380-71: Common quality carbon steel. Grades

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-72: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

OST 26-01-1504-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Types and parameters

OST 26-01-1505-76: Axial lens compensators without nozzles for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1506-76: Axial lens compensators with nozzles for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1507-76: Axial lens compensators with nozzles and directional pipe for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1508-76: Axial lens compensators with steel flat welded flanges for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1509-76: Axial lens compensators with steel flat welded flanges and directional pipe for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1510-76: Axial lens compensators with steel butt welded flanges for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1511-76: Axial lens compensators with steel butt welded flanges and directional pipe for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 26-843-77: Flange connections of pipes and valves. Flanges. Technical requirements

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PUG 69: Regulations for the Design and Safe Operation of Pipelines for Combustible, Toxic and Liquefied Gases

The Document is Referenced By:

OST 26-01-1510-76: Axial lens compensators with steel butt welded flanges for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

OST 26-01-1511-76: Axial lens compensators with steel butt welded flanges and directional pipe for PN <= 2.5 MPa (25 kgf / cm2). Design and dimensions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!