imgalt

OST 26-02-1496-76

ОСТ 26-02-1496-76

Air, gas and liquid medium vessels and devices. Technical specifications.

Сосуды и аппараты для воздуха, газов и жидких сред. Технические условия.

Status: Not effective - Superseded

The standard applies to land vessels and vessels of capacitive type with volumes from 1 to 200 m3, operating under pressure from 0.07 to 2.5 MPa (0.7 to 25 kgfs).

Стандарт распространяется на наземные сосуды и аппараты емкостного типа с объемами от 1 до 200 м3, работающие под давлением среды от 0,07 до 2,5 МПа (0,7 до 25кгс/см2). Сосуды и аппараты предназначены для применения в технологических установках нефтеперерабатывающей, нефтехимической и газовой промышленностей для некоррозионных взрывоопасных и токсичных сред в виде газа и жидкости с плотностью жидкости не более 1г/см3 и температурой, не превышающей температуру кипения жидкости при рабочем давлении, и для воздуха

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Soyuzneftekhimmash Minkhimneftemasha, 12/23/1976

SKU: RUSS105439


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »


The Document is Replaced With:

OST 26-18-1-84: Capacitive apparatuses cylindrical, for air, gases and liquids. Specifications

The Document References:

GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules

GOST 1050-74: High-grade constructional carbon steel

GOST 13168-69: Preservation of metal products (including large-size ones)

GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications

GOST 14249-73: Vessels and apparatus. Norms and methods of strength calculation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15180-70: Flexible flat gaskets. Dimensions

GOST 17314-71: Devices for fixing the thermal insulation of steel vessels and apparatus. Design, dimensions and technical requirements

GOST 380-71: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 481-71: Paronite

GOST 5520-69: Steel sheet, carbon and low-alloy for boiler construction and pressure vessels. Technical requirements

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions

GOST 9065-75: Washers for flanged connection with medium temperature 0 to 650 °C. Types and general sizes

GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions

GOST 9459-60: Instruments for monitoring bevel gears. General technical requirements

GOST 9931-69: Vessels and apparatus cylindrical steel welded. Types and basic dimensions

OST 26-02-1192-81: External and internal heaters for vessels and apparatuses. Types, design, dimensions and general technical requirements

OST 26-02-757-79: Ladders. Design, dimensions and specifications.

OST 26-02-911-79: Rings for inflexibility of vessels and vehicles. Design, dimensions and specifications.

OST 26-1265-75: Seat supports of vertical vessels and apparatuses. Design, dimensions and technical requirements

OST 26-1267-75: Support sheet. Design and dimensions

OST 26-1403-76: Nozzles for vessels and apparatuses, steel, welded. Types and dimensions

OST 26-1404-76: Nozzles with flat steel welded flanges with a connecting lug. Design and dimensions

OST 26-1405-76: Nozzles with flat steel welded flanges with a lug or recess. Design and dimensions

OST 26-1406-76: Nozzles with flat steel welded flanges with a pin or hole. Design and dimensions

OST 26-1407-76: Nozzles with steel butt welded flanges with a connecting lug. Design and dimensions

OST 26-1408-76: Nozzles with steel butt welded flanges with a lug or recess. Design and dimensions

OST 26-1409-76: Nozzles with steel butt welded flanges with a pin or hole. Design and dimensions

OST 26-1410-76: Nozzles with steel flanges, butt welded, for oval gasket. Design and dimensions

OST 26-1411-76: Nozzles for vessels and apparatuses, steel, welded. Technical requirements

OST 26-1412-76: Nozzles, of extra thickness, with connecting lug. Design and dimensions

OST 26-1413-76: Nozzles, of extra thickness, with lug or recess. Design and dimensions

OST 26-1414-76: Nozzles, of extra thickness, with pin or hole. Design and dimensions

OST 26-1415-76: Nozzles, of extra thickness, for oval section gasket Design and dimensions

OST 26-1416-76: Nozzles, of extra thickness. Design and dimensions

OST 26-1417-76: Nozzles of extra thickness for vessels and apparatuses, steel, welded. Technical requirements

OST 26-2000-83: Welded vessels and apparatus hatches. Types.

OST 26-2001-83: Hatches with bracket for welded steel vessels and apparatus. Design.

OST 26-2002-83: Welded steel vessels and apparatus Hatches with flat caps. Design.

OST 26-2003-83: Hatches with spherical caps for welded steel vessels and apparatus. Design.

OST 26-2004-83: Hatches for welded steel vessels and apparatus. Design .

OST 26-2005-83: Hatches with weld neck flanges, with “male-female” type sealing surface for welded steel vessels and apparatus. Design and dimensions.

OST 26-2006-83: Hatches with weld neck flanges, with "tongue and groove"-type sealing surface for welded steel vessels and apparatus. Design and dimensions.

OST 26-2007-83: Hatches with weld neck flanges, for octagonal cross-section gasket for welded steel vessels and apparatus. Design.

OST 26-2008-83: Flat hatch covers for steel containers and equipment. Design .

OST 26-2009-83: Spherical hatch covers for welded steel containers and apparatus. Design.

OST 26-2010-83: Cover shells of welded steel vessels and apparatus. Design.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2012-83: Hinged device for manhole covers of welded steel of vessels and apparatuses. Design and dimensions.

OST 26-2013-83: tilt-up devices for welded steel manhole covers of vessels and apparatuses. Design.

OST 26-2014-77: Steel welded vessels and devices. Rotating devices for horizontal hatch covers. Construction and dimensions.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2016-77: Industrial packaging. Types, basic parameters and dimensions (limitation of GOST 14861-74)

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 26-467-84: Cylindrical and conical supports for the vertical apparatus. Types and basic dimensions.

OST 26-487-72: Vessels and apparatuses. Standards and methods of strength calculation. Estimated impact from wind loads and seismic action in the vertical cylindrical apparatus

OST 26-665-87: Supports –rack for vertical devices. Styles, designs and dimensions

OST 26-771-73: Vessels and apparatuses. Calculation methods of strengthening the holes in the shells, crossings and bottoms

OST 26-839-73: Flange connections of pipes and valves. Flanges with a connecting lug, flat, steel, butt welded. Design and dimensions

OST 26-840-73: Flange connections of pipes and valves. Flanges with lug or recess, steel, butt welded. Design and dimensions

OST 26-843-77: Flange connections of pipes and valves. Flanges. Technical requirements

OST 26-844-73: Flange connections of pipes and valves. Gaskets asbestos-metallic. Design and dimensions. Technical requirements

SNiP III-31-74: Technological equipment. Main provisions

SNiP III-G.10.10-65: Devices of column and tower types. Rules of production and acceptance of installation works

The Document is Referenced By:

GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
Chill moulds. Ventilation channels. Dimensions
Language: English
Price: $68.00
imgalt
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English
Price: $151.00
imgalt
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English
Price: $154.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!