OST 26-1046-87
ОСТ 26-1046-87
|
|
High-pressure vessels and devices. Norms and methods of endurance calculation.
Сосуды и аппараты высокого давления. Нормы и методы расчета на прочность.
Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"
The standard applies to steel vessels forged, forged-welded, multi-layered, as well as single-layer, made of sheet steel, operating under an internal pressure of over 10 MPa to 100 MPa, used in the chemical, petrochemical, mineral fertilizer and other related industries, meeting the requirements of GOST 11879-81, OST 26-01-9-80, OST 26-01-221-86. The standard establishes norms and methods for calculating the strength under static and low-cycle loading of cylindrical single-layer and multi-layer shells, flat and convex bottoms, studs, flanges, flat and convex covers, reinforcing holes in the shells and convex bottoms.
Стандарт распространяется на сосуды и аппараты стальные кованые, кованосварные, многослойные, а также однослойные, изготовленные из листового проката, работающие под действием внутреннего давления свыше 10 МПа до 100 МПа, применяемые в химической, нефтехимической промышленности, производстве минеральных удобрений и других смежных отраслях промышленности, отвечающие требованиям ГОСТ 11879-81, ОСТ 26-01-9-80, ОСТ 26-01-221-86. Стандарт устанавливает нормы и методы расчета на прочность при статическом и малоцикловом нагружении цилиндрических однослойных и многослойных обечаек, плоских и выпуклых днищ, шпилек, фланцев, плоских и выпуклых крышек, укрепления отверстий в обечайках и выпуклых днищах.
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS106848
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Industry standards »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
National Standards for OKSTU »
CHEMICAL AND PETROLEUM ENGINEERING »
Calculation and design standards. Technical documentation »
As a Replacement Of:
OST 26-1046-74: High-pressure vessels and devices. Norms and methods of endurance calculation.
The Document References:
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 20072-74: Heat-resistant steel
GOST 25215-82: High-pressure vessels and apparatus. Shells and heads. Norms and methods of strength calculation
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 26303-84: High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-138-81: Threaded joints for vessels and devices for pressure over 9,81 up to 98,1 MPа (over 100 up to 1000 kgf/cm2). Types and dimensions.
OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.
ST SEV 5206-85: Vessels and high-pressure apparatus. Flanges, caps flat and convex. Strength analysis methods
The Document is Referenced By:
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26-01-168-88: Fixed metal seals for vessels and apparatus at pressures above 10 to 100 MPa (over 100 to 1000 kgfs/cm2). The method of calculation of strength and density
RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
