imgalt

OST 26-11-10-93

ОСТ 26-11-10-93

Welded joints. X-Ray TV testing method.

Соединения сварные. Рентгенотелевизионный метод контроля.

Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"

The standard applies to the control of welded joints of vessels and apparatus with a wall thickness of up to 40 mm and establishes the method of X-ray television monitoring using X-rays and X-ray television installations. The standard does not apply to welds with a constructive gap

Стандарт распространяется на контроль сварных соединений сосудов и аппаратов с толщиной стенки до 40 мм и устанавливает методику рентгенотелевизионного контроля с применением рентгеновского излучения и рентгенотелевизионных установок. Стандарт не распространяется на сварные швы с конструктивным зазором

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Glavkhimneftemash of Roskommash, 12/30/1993

SKU: RUSS106896

Price: $292.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »

ISO classifier » 19 TESTS » 19.100 Non-destructive testing »


The Document References:

GOST 17925-72: Sign of radiation danger

GOST 20426-82: Radiation methods of defectoscopy

GOST 25706-83: Magnifiers

GOST 27947-88: Non-destructive testing. Tv radiographic method. General requirements

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

PB 10-115-96: Regulations of design and safe operation of pressure vessels

The Document is Referenced By:

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

RD 24.200.11-90: Pressure-operated vessels and devices. Safety rules and standards during hydro-proof and leak-proof testing operations.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26.260.011-99: Methodological instructions. Calculated setting of standards for air-tightness of vessels and apparatuses.

RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-02-93: Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials

RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials

RDM 929-04-93: Certificate of measurement of the mass fraction of manganese in carbon steels and unalloyed iron in the control of raw materials

RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-07-93: Certificate for the method of measuring the mass fraction of manganese by the titrimetric method with a cobalt-copper catalyst in carbon steel in the control of raw materials and finished products

RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium

RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel

RDM 929-10-93: Certificate for the method of measuring the mass fraction of chromium in carbon steel in the control of raw materials and finished products

RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials

RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials

RDM 929-13-93: Certificate for the method of measuring the mass fraction of nickel in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials

RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products

RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products

RDM 929-22-93: Certificate for the method of measuring the mass fraction of cerium in carbon steel in the control of raw materials and finished products

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!