imgalt

OST 26-3-87

ОСТ 26-3-87

Welding in chemical mechanical engineering. Main provisions.

Сварка в химическом машиностроении. Основные положения.

Status: Not effective - Superseded

The standard applies to the welding of products operating at a temperature not lower than 70 degrees Celsius from metallic materials used in chemical engineering for welded structures. The standard establishes the basic requirements for welding technology and is intended for use in the design of chemical equipment and the development of technological processes.

Стандарт распространяется на сварку изделий, работающих при температуре не ниже 70 градусов Цельсия, из металлических материалов, применяемых в химическом машиностроении для сварных конструкций. Стандарт устанавли��ает основные требования к технологии сварки и предназначен для использования при проектировании химического оборудования и разработке технологических процессов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Ministry of Chemical and Petroleum Engineering, 5/25/1987

SKU: RUSS107284


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »

Welding regulations » Welding work »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.10 Welding Processes »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.10 Welding Processes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »

National Standards for OKSTU » CHEMICAL AND PETROLEUM ENGINEERING » General rules and regulations »


As a Replacement Of:

OST 26-01-82-77: Welding in chemical mechanical engineering. Main provisions and technology.

The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 1050-74: High-grade constructional carbon steel

GOST 10561-80: Cryolite artificial technical. Technical conditions

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11680-76: Cotton fabrics coarse Calico group. Specification

GOST 13078-81: Sodium glass liquid. Technical conditions

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions

GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16038-80: Arc welding. Welded joints in pipelines of copper and copper-nickel alloy. Main types, design elements and dimensions

GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions

GOST 16130-90: Welding wire and rods of copper and copper alloys. Specifications

GOST 16214-70: Tape polyvinylchloride electro insulation. Specification

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19807-74: Titanium and titanium alloys, processed by pressure. Types

GOST 20072-74: Heat-resistant steel

GOST 2112-79: Electromechanical round copper wire. Specification

GOST 2246-70: Welding steel wire. Specifications

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 23949-80: Welding non-consumable tungsten electrodes specifications.

GOST 2424-83: Grinding wheels

GOST 2603-79: Reagents. Acetone. Specifications

GOST 26389-84: Welded joints. Test methods on resistance to shrinkage crack formation under fusion welding

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2871-75: Sodium fluoride, technical. Specification

GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods

GOST 380-71: Common quality carbon steel. Grades

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 4234-77: Reagents. Potassium chloride. Specifications

GOST 4421-73: Fluorite concentrate for welding materials. Specifications

GOST 4422-73: Milled feldspar for electrode coverings

GOST 4463-76: Reagents. Sodium fluoride. Specifications

GOST 4755-80: Ferromanganese. Specification

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades

GOST 5009-82: Abrasive cloth. Specifications

GOST 5100-85: Soda ash technical. Technical conditions

GOST 5222-72: Silicon-manganese bronze wire

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-84: Steels and alloys, corrosion-resistant. Methods for determination of resistance against intergranular corrosion

GOST 6376-74: Hand anemometer accounting device. Specifications

GOST 7168-80: Barium fluoride. Technical conditions

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure

GOST 8050-85: Carbon dioxide,

GOST 859-78: Copper. Grades

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9087-81: Welding melted fluxes

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 9389-75: Carbon steel spring wire

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 9656-75: Reagents. Boric acid. Specifications

The Document is Referenced By:

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!