OST 36-62-81
ОСТ 36-62-81
|
|
Hoisting equipment. General technical requirements.
Оборудование грузоподъемное. Общие технические требования.
Status: Not effective
The standard applies to the following types of lifting equipment, manufactured by enterprises of the USSR Minmontazhspetsstroy: installation cranes of all types; special lifting machines (loaders, pipelayers, aerial platforms, drilling and crane machines, heavy trailers, etc.); load-lifting mounting devices (mounting masts, booms, portals, etc.); load gripping mounting devices (traverses, clamps, grabs, etc.); electric and manual hoists and winches for installation work; on other machines and devices, in the drawings or technical conditions of which there are references to this standard.
Стандарт распространяется на следующие виды грузоподъемного оборудования, изготавливаемые предприятиями Минмонтажспецстроя СССР: краны монтажные всех типов; грузоподъемные монтажные машины специального назначения (погрузчики, трубоукладчики, автогидроподъемники, бурильно-крановые машины, прицепы-тяжеловозы и др.); грузоподъемные монтажные приспособления (монтажные мачты, стрелы, порталы и др.); грузозахватные монтажные приспособления (траверсы, захваты, грейферы и др.); электрические и ручные тали и лебедки для монтажных работ; на прочие машины и приспособления, в чертежах или технических условиях которых имеются ссылки на настоящий стандарт.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Ministry of Installation,
10/15/1981
SKU: RUSS113722
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Industry standards »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
National standards »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.01 Lifting equipment in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G86 Lifting equipment »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Construction equipment and machines »
The Document is Replaced With:
RD 36-62-00: Hoisting equipment. General technical requirements.
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.028-80: System of the standards for safety of work
GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements
GOST 12.2.011-75: Construction and road machines
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12970-67: Round plates for machines and devices. Dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 17187-81: Noise meters
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 2105-75: Forged and swaged hooks. Technical requirements
GOST 2246-70: Welding steel wire. Specifications
GOST 22827-85: General purpose self-propelled boom cranes
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 25129-82: Primer GF-031. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3242-79: Welded joints
GOST 4543-71: Structural alloyed steel
GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades
GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions
GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.402-80: Metal surface preparation for painting
GOST 9087-81: Welding melted fluxes
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
The Document is Referenced By:
OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.
PB 10-14-92: Codes for installation and safe operation of lifting cranes
PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety
PB 10-256-98: Regulations on design and safe operation of hoists (derricks)
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.