imgalt

OST 39-227-89

ОСТ 39-227-89

Water for flooding of oil reservoirs. Determination of the filtration performance and water-sensitiveness of low-permeable rock-reservoirs in-situ.

Вода для заводнения нефтяных пластов. Определение фильтрационной характеристики и водовосприимчивости низкопроницаемых пород-коллекторов в пластовых условиях.

Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"

The standard applies to various types of water intended for pumping into a productive reservoir for the purpose of flooding of oil reservoirs. The standard establishes a method for determining the filtration characteristics and water susceptibility of reservoir rocks, due to the quantitative and qualitative composition of clay cement and detrital parts, in conditions as close as possible to the reservoir.

Стандарт распространяется на различные типы вод, предназначенные для закачки в продуктивный коллектор с целью заводнения нефтяных пластов. Стандарт устанавливает метод определения фильтрационной характеристики и водовосприимчивости пород-коллекторов, обусловленных количественным и качественным составом глинистого цемента и обломочной части, в условиях максимально приближенных к пластовым.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Ministry of Oil Industry, 2/6/1989

SKU: RUSS115421


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 2 Protection and protection of surface water bodies » 2.2 Rationing impact on water bodies » 2.2.1 Rationing of quality of water bodies » 2.2.1.3 Requirements for quality of water bodies of industrial water use »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.060 Water quality » 13.060.25 Industrial water »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.060 Water quality » 13.060.25 Industrial water »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.040 Analytical Chemistry » 71.040.40 Chemical analysis »

National standards » 71 CHEMICAL INDUSTRY » 71.040 Analytical Chemistry » 71.040.40 Chemical analysis »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L0 General rules and regulations for chemical industry » L09 Test methods. Packaging. Marking »

National Standards for OKSTU » INORGANIC CHEMICAL PRODUCTS, MINING CHEMICAL RAW MATERIALS AND FERTILIZERS » Control methods (testing, analysis, measurements) »


The Document References:

GOST 10028-81: Glass capillary viscosimeters. Specifications

GOST 10110-87: Circles diamond

GOST 12026-76: Filter paper for laboratory application

GOST 14707-82: Rotary vane and valve vacuum pumps. Tupes and basic parameters

GOST 166-89: Vernier callipers. Specifications

GOST 17229-85: Passenger and transport aeroplanes. Determination of noise levels on ground

GOST 17299-78: Technical ethyl alcohol. Specifications

GOST 21241-89: Medical pincers

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 26450.0-85: Rocks. General requirements for sampling and sample preparation for determination of collecting properties

GOST 4171-76: Reagents. Sodium sulphate 10-aqueous. Specifications

GOST 4201-79: Reagents. Sodium bicarbonate. Specifications

GOST 4209-77: Reagents. Magnesium chloride 6-aqueous. Specifications

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 8711-78: Ammeters and voltmeters. General technical specifications

GOST 9245-79: Measuring direct current potentiometers

GOST 9572-77: Petroleum benzene. Technical requirements

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

The Document is Referenced By:

OST 39-225-88: Water Injection Reservoir Quality

OST 39-225-88: Water for flooding of oil reservoirs. Quality requirements.

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English
Price: $240.00
imgalt
Main-line diesel locomotives. General technical requirements.
Language: English
Price: $514.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English
Price: $254.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English
Price: $386.00
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English
Price: $542.00
imgalt
Locomotives. Requirements for strength and dynamic qualities
Language: English
Price: $808.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!