OST 95 10439-2002
ОСТ 95 10439-2002
|
|
Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
Оборудование для работы с радиоактивными средами. Общие технические требования. Приемка. Эксплуатация и ремонт.
Status: Reference materials, MP, TPR. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"
The standard applies to the developed and modernized technological equipment (vessels, apparatus, reactors, boxes) and pipelines designed to work with radioactive media in industries not covered by the requirements of NRB-99 "Ionizing radiation. Radiation safety. Radiation safety standards" and OSPORB -99 "Basic Sanitary Rules for Radiation Safety"
Стандарт распространяется на разрабатываемое и модернизируемое технологическое оборудование (сосуды, аппараты, реакторы, боксы) и трубопроводы, предназначенные для работы с радиоактивными средами в производствах, на которые не распространяются требования НРБ-99 "Ионизирующее излучение. Радиационная безопасность. Нормы радиационной безопасности" и ОСПОРБ-99 "Основные санитарные правила обеспечения радиационной безопасности"
Choose Language:
Format: Electronic (pdf/doc)
Approved: Minatom of the Russian Federation,
2/8/2002
SKU: RUSS125746
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Industry standards »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
Other documents »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
2 Nuclear fuel cycle enterprises »
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.011-78: Explosive mixtures. Classification and test methods
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.4.026-76: Signal colors and safety signs
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14192-96: Cargo marking
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 17925-72: Sign of radiation danger
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 2.314-68: Unified system for design documentation. Instructions for marking and stamping articles
GOST 2.601-95: Operational documents
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23755-79: Plates of titanium and titanium alloys. Specifications
GOST 24297-87: Input inspection of products. General provisions.
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 24757-81: Vessels and apparatus. Apparatus of column type. Norms and methods of strength calculations
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 25867-83: Vessels and apparatuses. Jacketed vessels. Norms and methods of strength calculation
GOST 26158-84: Vessels and apparatus of non-ferrous metals. Norms and methods of strength calculation. General requirements
GOST 26159-84: Cast iron vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
NRB 99: Radiation Safety Standards
OST 26-11-06-85: Titanium and titanium alloy welded vessels and devices. General technical specifications.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PBJa 06-00-96: Basic industry nuclear safety rules for the use, processing, storage and transportation of nuclear hazardous fissile materials
PBJa 06-10-99: Industry rules for the design and operation of alarm systems for the occurrence of a self-sustaining chain reaction and the organization of measures to limit its consequences.
PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection
PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods
SP 2.6.1.2612-10: Basic sanitary rules for radiation safety
The Document is Referenced By:
OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.
RD 95 10541-98: Equipment for working with radioactive media. Classification
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
