Typical technological process of installation electrical equipment. Main provisions.
Типовые технические условия на ремонт паровых и водогрейных котлов промышленной энергетики.
Status: It is excluded from the register, index, list. According to the letter of Rostekhnadzor No. 09-03-04
Technical conditions apply to the repair of pressure elements, steam boilers, waste heat boilers (including gas and fire tubes) and power technological units with pressures above 0.07 MPa to 4.0 MPa and water boilers with water heating temperature over 115 degrees Celsius used in industrial energy and heating boilers
Технические условия распространяются на операции по ремонту элементов, работающих под давлением, паровых котлов, котлов-утилизаторов (в том числе газо- и жаротрубных) и энерготехнологических агрегатов с давлением свыше 0,07 МПа до 4,0 МПа и водогрейных котлов с температурой нагрева воды свыше 115 градусов Цельсия, используемых в промышленной энергетике и отопительных котельных
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 28
Approved: Gosgortekhnadzor of Russia,
7/4/1994
SKU: RUSS125943
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.6 Industrial safety requirements for pressure equipment »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.65 Water heating equipment »
The Document References:
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 1215-79: Malleable iron castings
GOST 1412-85: Flakish graphite cast iron
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2.301-68: Unified system for design documentation. Formats
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 977-88: Steel castings. General specifications
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.
OST 108.031.08-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. General provisions on substantiation of wall thickness.
OST 108.031.10-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. Determination of strength ratios.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
Resolution: Rules for the design and safe operation of steam and hot water boilers
The Document is Referenced By:
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 153-39TN-008-96: Guide to Operation, Maintenance, and Repair of Equipment and Facilities of Petroleum Pumping Stations
|
Customers Who Viewed This Item Also Viewed:
 |
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English |
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English |
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English |
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English |
Seismic building design code
Language: English |
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
