RD 153-34.1-17.461-00
РД 153-34.1-17.461-00
|
|
Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.
Методические указания по капиллярному контролю сварных соединений, наплавок и основного металла при изготовлении, монтаже, эксплуатации и ремонте объектов энергетического оборудования.
Status: Effective
Guidelines regulate the conduct of capillary inspection of welded joints, surfacing and base metal in the manufacture. Installation, operation and maintenance of energy equipment. The document establishes the requirements for the personnel conducting the control, the procedure for selecting the mode and sensitivity, the sequence of preparatory work, the requirements for equipment and materials, control technology, rules for processing results and safety of work
Методические указания регламентируют проведение капиллярного контроля сварных соединений, наплавок и основного металла при изготовлении. Монтаже, эксплуатации и ремонте объектов энергетического оборудования. Документ устанавливает требования к персоналу, проводящему контроль, порядок выбора режима и чувствительности, последовательность выполнения подготовительных работ, требования к аппаратуре и материалам, технологии контроля, правилам оформления результатов и безопасности выполнения работ
Choose Language:
Format: Electronic (pdf/doc)
Approved: RAO UES of Russia,
1/1/2000
SKU: RUSS126083
The Product is Contained in the Following Classifiers:
Power industry »
17. Welding. Heat treatment. Metal control »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Standards for pipe fittings (TPA) »
10. Production »
10.6 Non-destructive testing »
Standards for pipe fittings (TPA) »
10. Production »
10.4 Surfacing »
Standards for pipe fittings (TPA) »
10. Production »
10.3 Welding »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
The Document References:
GOST 10597-87: Painting brishes. Specifications
GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification
GOST 12.4.015-76: Occupational safety standards system. Special clothing. Classification
GOST 12.4.016-83: Occupational safety standards system. Special protective clothes. Nomenclature of quality indexes
GOST 12.4.020-82: Occupational safety standards safety. Means for personal protection of hands. Nomenclature of quality indices
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19607-74: Processed kaolin for chemical industry. Specifications
GOST 21285-75: Caoline concentrated for perfume industry. Specifications
GOST 2424-83: Grinding wheels
GOST 24522-80: Capillary non-destructive inspection. Terms and definitions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 2603-79: Reagents. Acetone. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28369-89: Non-destructive testing. Ultra-violet irradiators
GOST 443-76: Benzene-solvent for rubber industry. Technical requirements
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.514-84: State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 938.3-77: Leather. Method of determination of chrome content
GOST 9411-91: Colored optical glass
GOST 9412-93: Medical gauze
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
OST 108.004.101-80: Non-destructive testing. Luminescent, coloured and fluorescent-coloured methods. Main provisions.
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
RD 10-577-03: Typical instruction for metal control and extend the life of the main elements of boilers, turbines and pipelines of thermal power stations. Serie 10. Output 30.
RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.
RD 2730.940.103-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.17.401-95: Instructions for scope and procedure of metal input control of power equipment with pressure of 9 MPa and more, before its commissioning.
RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.
RD 34.17.439-96: Methodological instructions. Technical diagnostics and life extension of the vessels, working under pressure.
Resolution: Rules for the design and safe operation of steam and hot water boilers
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 4557-88: Sanitary norms for ultraviolet radiation in production areas
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.