RD EO 1.1.2.01.0713-2013
РД ЭО 1.1.2.01.0713-2013
|
|
Provisions on acceptance and testing form conformity assessment for nuclear plants.
Положение об оценке соответствия в форме приемки и испытаний продукции для атомных станций
Status: Effective
The Regulation defines the organization, procedure and basic principles of the activities of Rosenergoatom Concern OJSC, general contractors, suppliers, authorized organizations and manufacturing enterprises (the Russian Federation and abroad) when conducting conformity assessment in the form of
Положение определяет организацию, порядок и основные принципы деятельности ОАО «Концерн «Росэнергоатом», генподрядчиков, поставщиков, уполномоченных организаций и предприятий-изготовителей (Российской Федерации и зарубежных) при проведении оценки соответствия в форме приемки и/или испытаний продукции, предназначенной для использования на строящихся и действующих АЭС в составе элементов или в качестве элементов, отнесенных к 1, 2, 3 и 4 классам безопасности согласно НП 001
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosenergoatom Concern OJSC,
1/27/2014
SKU: RUSS126508
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Standards for pipe fittings (TPA) »
15. Quality and conformity assessment »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.1 For nuclear power »
PromExpert »
SECTION I. TECHNICAL REGULATION »
IV Conformity assessment of products and services »
1 Key points infield of conformity assessment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.3 Quality Management »
2.3.1 Fundamentals of quality management »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.20 Nuclear power plants. Security »
As a Replacement Of:
RD EO 1.1.2.01.0713-2008: Regulation on quality control of manufacturing of equipment for nuclear power plants
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10032-80: Stationary, mobile or marine auxiliary diesel generators
GOST 10121-76: Selectively purified transformer oil
GOST 10150-2014: Piston internal combustion engines. General specifications
GOST 10169-77: 3-phase synchronous machines. Test methods
GOST 10272-87: Double entry centrifugal pumps. Technical requirements
GOST 10407-88: Centrifugal multistage segmental pumps. Types and basic parameters
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more
GOST 11677-85: Power transformers
GOST 11828-86: Rotating electrical machines. General test methods
GOST 11920-85: General purpose oil-immersed power transformers rated for voltage up to 35 kv inclusively
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations
GOST 12.2.024-87: Noise. Power oil-immersed transformers.
GOST 12052-90: Piston and plunger pumps. Range of basic parameters and dimensions
GOST 12450-82: Ac circuit breakers for the rated voltages from 110 to 750 kv
GOST 12965-85: General purpose oil-immersed power transformers rated for voltages 110 and 150 kv
GOST 13822-82: Generating sets and moving diesel-power stations. General specifications
GOST 14209-85: Oil-immersed general-purpose power transformers. Permissible loads
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv
GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
GOST 16372-93: Rotating electric machines. Limiting values of noise levels
GOST 16772-77: Converter transformers and reactors. General specifications
GOST 17335-79: Positive displacement pumps
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 17544-85: General purpose power oil transformers of voltage classes 220, 330, 500 and 750 kv
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 1983-2015: Voltage transformers. General specifications
GOST 20243-74: Power transformers. Methods of short-circuit tests
GOST 20439-87: Electric generating sets and mobile electric power stations with internal combustion engines. Requirements for reliability and control methods
GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.
GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 21558-2000: Excitation system for turbo generators, hydrogenerators and synchronous condensers. General specifications
GOST 22247-96: Centrifugal and section pumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods
GOST 22337-77: Centrifugal feed pumps. Basic parameters
GOST 22465-88: Centrifugal booster pumps. Main parameters
GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development
GOST 24126-80: Power transformer on-load tap-changing devices. General specifications
GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24464-80: Feeding pumps of power untis of nuclear power plants
GOST 24465-80: Condensate pumps of power-generating units at nuclear power stations
GOST 25364-97: Land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on non-rotating parts and general requirements for the measurement of vibration
GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency
GOST 26656-85: Technical diagnostics. Testability. General requirements
GOST 26772-85: Rotating electrical machines. Terminal markings and direction of rotation
GOST 27.003-2016: Reliability in technology. Composition and general rules for setting reliability requirements
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27518-87: Diagnostics of items. General reguirements
GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts
GOST 30830-2002: Power transformers. Part 1. General
GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements
GOST 31839-2012: Pumps and pump units for pumping of liquids. General safety requirements
GOST 31840-2012: Submersible pumps and pump units. Safety requirements
GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems
GOST 32600-2013: Pumps. Shaft sealing systems for centrifugal and rotary pumps. General technical requirements and control methods
GOST 4.171-85: Product-quality index system. Turbo-generators, whater-wheel generators, synchronous condensers and their excitation systems. Nomenclature of indices
GOST 4.316-85: System of product-quality indices. Power, small, measuring transformer. Complete transformer substations. High-voltage bushings. Nomenclature of indices
GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications
GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications
GOST 6000-88: Condensate centrifugal pumps. Parameters and dimensions
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 721-77: Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V
GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods
GOST 7746-2015: Current transformers. General specifications
GOST 8865-93: Electrical insulation system. Thermal evalution and classification
GOST 9630-80: Three-phase asynchronous motors. General specifications.
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 21.1001-2009: System of design documents for construction. General principles
GOST R 51757-2001: 3-phase induction motors of voltage over 1000 V for auxiliaries of thermal power stations. General specifications
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 52719-2007: Power transformers. General specifications
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 52857.7-2007: Vessels and apparatus. Norms and methods of strength calculation. Heat-exchangers
GOST R 53472-2009: Rotating electrical machines. Asynchronous motors. Test methods
GOST R 54804-2011: Centrifugal pumps. Technical specifications. Class III
GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II
GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I
GOST R 55187-2012: Insulated bushings for alternating current rated voltages above 1000 V. Common specifications
GOST R 55195-2012: Electrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PNAE G-01-011-97: General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.
PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
PNST 165-2016: Electric generating sets for nuclear plants with internal combustion engines. General specifications. Рlacement requirements
PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements
RB 089-14: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Visual and measuring testing.
RD 03-36-2002: Terms of supply of imported equipment, goods, materials and components for nuclear facilities, radiation sources and storage of the Russian Federation
RD 24.022.09-87: The leading document. Branch system of production technological preparation. Rules. Checks of the equipment on technological accuracy.
RD EO 1.1.2.01.0713-2008: Regulation on quality control of manufacturing of equipment for nuclear power plants
RD EO 1.1.2.01.0740-2008: Technical documentation. Regulations on the procedure for the development, registration and accounting solutions (technical solutions)
RD EO 1.1.2.01.0740-2012: Technical documentation. Regulation on the development, registration and accounting of decisions (technical solutions)
RD EO 1.1.2.01.0930-2013: Regulation on management of inconsistencies during manufacture and incoming inspection of the products for NPPs
RD EO 1.1.2.01.0931-2013: Main provisions of incoming production inspection at nuclear power plants
RD EO 1.1.2.01.0958-2014: Coordination of specifications and decisions related to applying import products intended for use at nuclear power generating stations. Regulation.
RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment
RG 1.3.3.99.0018-2015: Regulation of the interaction of Rosenergoatom Concern OJSC and Engineering Company (NPP General Designer) in the coordination of technical specifications and specifications for NPP equipment
The Document is Referenced By:
MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions
OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements
OTT 1.1.3.10.1446-2018: Atom stations. Control systems important to safety. Creation, modernization and operation. General technical requirements
RD EO 1.1.2.01.0075-2015: Safety stock of equipment, components and spare parts for unplanned repairs at nuclear power plants. Position
RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions
RD EO 1.1.2.01.0958-2014: Coordination of specifications and decisions related to applying import products intended for use at nuclear power generating stations. Regulation.
RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment
RD EO 1.1.2.29.0952-2014: Production certification procedure
RD EO 1.1.2.29.0954-2014: The procedure for analyzing documentation for equipment supplied to nuclear power plants
RD JeO 1.1.2.01.0308-2015: The procedure for the collection, processing, storage and transmission of information about failures and damage to equipment of nuclear power plants. Position
RD JeO 1.1.2.01.0573-2019: Conducting inspections of the implementation of quality assurance programs of Rosenergoatom Concern JSC and organizations performing work and providing services to the operating organization. Position
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
