GOST 1.2-2015

ГОСТ 1.2-2015

Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

Межгосударственная система стандартизации. Стандарты межгосударственные, правила и рекомендации по межгосударственной стандартизации. Правила разработки, принятия, обновления и отмены

Status: Effective - Supersedes. IUS 5-2016

The standard establishes the rules for the development, adoption, updating (revision, amendment and amendment) and cancellation of interstate standards, rules and recommendations on interstate standardization. The standard does not apply to the procedure for developing, adopting, updating and canceling interstate standards for defense products and other products, information about which is a state secret or which is used to protect this information. In relation to the standard at the national level, in the member states of the Agreement on the implementation of a harmonized policy in the field of standardization, metrology and certification, additional and

Стандарт устанавливает правила разработки, принятия, обновления (пересмотра, внесения изменений и поправок) и отмены межгосударственных стандартов, правил и рекомендаций по межгосударственной стандартизации. Стандарт не распространяется на процедуру разработки, принятия, обновления и отмены межгосударственных стандартов на оборонную продукцию и иную продукцию, сведения о которой составляют государственную тайну или которую используют для защиты этих сведений. По отношению к стандарту на национальном уровне в государствах-участниках Соглашения о проведении согласованной политики в области стандартизации, метрологии и сертификации могут быть установлены дополнительные и/или конкретизирующие правила, которые распространяются на процедуры разработки межгосударственных стандартов, правил и рекомендаций по межгосударственной стандартизации, а также изменений к ним.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: Federal Agency for Technical Regulation and Metrology, 12/11/2015

SKU: RUSS138250

Price: $322.04




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

PromExpert » SECTION I. TECHNICAL REGULATION » II Standardization » 2 Activities and organization of work on standardization »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »


As a Replacement Of:

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

The Document References:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.1-2002: Interstate system for standardization. Terms and definitions

GOST 1.3-2014: Interstate system for standardization. Standards interstate. Rules of development on the basis of the international and regional standards

GOST 1.4-2015: Interstate System for Standardization. Interstate technical committees for standardization. Rules of organization and function

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

PMG 22-2004: Rules for development of intergovernmental standartization program

PMG 48-2002: Order for electronic documents exchange

The Document is Referenced By:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.1-2002: Interstate system for standardization. Terms and definitions

GOST 1.4-2015: Interstate System for Standardization. Interstate technical committees for standardization. Rules of organization and function

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests

GOST 12.4.239-2013: Occupational safety standards system. Special clothing for protection against liquid chemicals. Method for determination of resistance of air-impermeable materials to permeation by liquids

GOST 12.4.245-2013: Occupational safety standards system. Respiratory protective devices. Gas filters and combined filters. General specifications

GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples

GOST 12536-2014: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution

GOST 13073-2018: Zinc wire.Technikal requirements. Specifications

GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST 167-2018: Lead tubes. Specifications

GOST 19903-2015: Hot-rolled sheet. Range

GOST 2.101-2016: Unified system for design documentation. Unified system for design documentation

GOST 2.114-2016: Unified system for design documentation. Specifications

GOST 2.317-2011: Unified system for design documentation. Axonometric projections

GOST 2.512-2011: Unified system for design documentation. Data package making rules for transfer electronic documentation. General principles

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.703-2011: Unified system of design documentation. Rules for presentation of kinematic diagrams

GOST 2.704-2011: Unified system of design documentation. Rules for making hydraulic and pneumatic diagrams

GOST 21.002-2014: System of design documents for construction. Compliance assessment of design and working documentation

GOST 21.110-2013: System of design documents for construction. Specification of equipment, products and materials

GOST 21.206-2012: System of design documents for construction. Symbols for presentation of pipelines

GOST 21.209-2014: System of building design documents. Centralized power supply control. Graphical and letter designations of the type and contents of information

GOST 21.210-2014: System of design documents for construction. Graphic symbols of electrical equipment and wiring on plans

GOST 21.501-2018: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21.502-2016: System of building design documents. Rules for the implementation of working documentation for metal structures

GOST 21.602-2016: System of building design documents. Rules for the implementation of working documentation for heating, ventilation and air conditioning systems

GOST 22270-2018: Heating, ventilation, air conditioning systems. Terms and definitions

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 22733-2016: Soils. Laboratory method for determination of maximum density

GOST 23735-2014: Sandy-gravel mixtures for construction work. Specifications

GOST 25011-2017: Meat and meat products. Methods for determining protein

GOST 25142-82: Surface roughness. Terms and definitions

GOST 2517-2012: Petroleum and petroleum products. Methods of sampling

GOST 25584-2016: Soils. Laboratory methods for determination of filtration factor

GOST 26323-2014: Fruit and vegetables processing products. Methods for determination of impurities of vegetable origin

GOST 26574-2017: Wheat flour baking. Technical conditions

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26671-2014: Processed fruit and vegetables, canned meat and cereal. Preparation of samples for laboratory analysis

GOST 26809.1-2014: Milk and milk products. Acceptance regulations, methods of sampling and for testing. Part 1. Milk, dairy, milk compounds and milk-contained products

GOST 26809.2-2014: Milk and milk products. The rules of test acceptance, methods of sampling and its preparation for the analysis. Part 2. Cow milk butter, spreads, cheese and cheese products, processed cheese and processed cheese products

GOST 27082-2014: Canned and preserved from fish, water invertebrates, water mammals and algae. Methods for determination of total acidity

GOST 27494-2016: Flour and bran. Methods for determination of ash content

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 28246-2017: Coating materials. Terms and definitions

GOST 3.1116-2011: Unified system for technological documentation. Norm control

GOST 30347-2016: Milk and milk product. Methods for determination of staphylococcus aureus

GOST 30416-2012: Soils. Laboratory testing. General requirements

GOST 31449-2013: Raw cow's milk. Specifications

GOST 31454-2012: Kefir. Specifications

GOST 31455-2012: Ryazhenka. Specifications

GOST 31456-2013: Sour clotted milk. Specifications

GOST 31607-2012: Energy conservation. Norm-menhod securing. Basic concept

GOST 31646-2012: Cereals. Method for determination of scabby kernels content

GOST 31729-2015: Wine drinks. General specifications

GOST 31796-2012: Meat and meat products. Fast histological method of identification of composition structural components

GOST 31828-2012: Drying and evaporating apparatus and plants. Safety requirements. Test methods

GOST 31829-2012: Ozonization equipment. Safety requirements

GOST 31833-2012: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST 31861-2012: Water. General requirements for sampling

GOST 31903-2012: Foodstuffs. Express-method for determination of the antibiotics

GOST 31954-2012: Drinking water. Methods of hardness determination

GOST 31978-2012: Caseins and caseinates. Method for determination of pH

GOST 32157-2013: Canned fish. Method for determination of oil deposit fraction of total mass

GOST 32224-2013: Meat and meat products for child nutrition. Method for determination of bone particle size

GOST 32387-2013: Goods of household chemistry. Method for determination of active oxygen mass fraction

GOST 32435-2013: Testing of chemicals of health hazard. Skin absorption: In vitro method

GOST 32462-2013: Liquid oil products Potentiometric method of the determination of mercaptan sulfur

GOST 32574-2013: Green tea. Specification

GOST 32770-2014: Food additives. Emulsifiers of foodstuffs. Terms and definitions

GOST 32922-2014: Pasteurized cow's milk - raw material. Specifications

GOST 32940-2014: Goat's milk raw. Specifications

GOST 32952-2014: Automobile roads of general use. Road marking. Test methods

GOST 33193-2014: Aviation turbine fuels and kerosine. Determination of smoke point

GOST 33196-2014: Distillate fuels. Determination of free water and particulate contamination by visual inspection method

GOST 33198-2014: Oil fuels. Determination of hydrogen sulfide content. Rapid liquid phase extraction method

GOST 33308-2015: Food additives. Glazing agents of foodstuffs. Terms and definitions

GOST 33429-2015: Meat and meat products. Determination of lactic acid and lactates using high performance liquid chromatography

GOST 33767-2016: Food additives. Methods for identification and determination of the mass fraction of the main colorant in the food colorant Anthocyanins E163

GOST 33799-2016: Railway telecommunications. Suspension rules of self-supporting optical waveguide cable on railway contact-line masts and power lines with voltage over 1000 V

GOST 33800-2016: Irradiated food products. General requirements for marking

GOST 33824-2016: Food-stuffs and food raw materials. The inversion-voltammetry method for determining the content of toxic elements (cadmium, lead, copper and zinc)

GOST 33924-2016: Milk and milk product. Methods for determining Bifidobacterium

GOST 33927-2016: Glazed curds. General specifications

GOST 33930-2016: Sago. Specifications

GOST 33951-2016: Milk and milk product. Methods for determination of the lactic acid bacteria

GOST 33957-2016: Definitions of reducing sugars and sucrose. The rules of tests acceptance, sampling and control methods

GOST 33958-2016: Canned milk. Whey powders. Specifications

GOST 33959-2016: Salted cheeses. Specifications

GOST 33971-2016: Food products, food raw materials. Method for determination of the residual content of metabolites of carbadox and olavindox by high-performance liquid chromatography with a mass spectrometric detector

GOST 33978-2016: Food products and mixed feeds. Method for determination of thyreostats by high perfomance liquid chromatografy-mass spectrometry

GOST 33999-2016: Specialized foodstuffs. Dietary medical and dietary preventive products. Terms and definitions

GOST 34006-2016: Specialized foodstuffs. Food products for sportsmens nutrition. Terms and definition

GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34143-2017: Krupa tritikalevaya. Tehnicheskie usloviya

GOST 34150-2017: Biological safety. Raw materials and food. Method of identification of genetically modified organisms (GMO) of plant origin using a biological microchip

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 7702.2.7-2013: Poultry meat, edible offal and poultry meat ready-to-cook. Methods for detection of Proteus bacteria

GOST 8.472-2013: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure

GOST 8.518-2010: State system for ensuring the uniformity of measurements. Ferritometers for austenitic steels. Verification procedure

GOST 8.566-2011: State system for ensuring the uniformity of measurements. Interstate data system on physical constants and properties of substances and materials. Basic provisions

GOST 8.608-2012: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of chromatic dispersion in optical fibre

GOST 8.613-2012: State system for ensuring the uniformity of measurements. Mineral fertilizer. Express methods of moisture content determination

GOST 8.649-2015: State system for ensuring the uniformity of measurements. Brown coals, hard coals and anthracite. Infrared thermogravimetric method for determination of total moisture

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8714-2014: Fish and aquatic mammals food oil. Specifications

GOST 8736-2014: Sand for construction works. Specifications

GOST 8756.1-2017: Products of processing fruits, vegetables and mushrooms. Methods for determining organoleptic characteristics, mass fraction of constituent parts, net mass or volume

GOST EN 12916-2017: Oil products. Determination of types of aromatic hydrocarbons in middle distillates. High performance liquid chromatography method with refractive index detection

GOST EN 14078-2016: Oil products liquid. Determination of fatty acid methyl esters (FAME) in middle distillates by infrared spectrometry

GOST IEC 60704-2-7-2016: Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-7. Particular requirements for fans

GOST ISO 12081-2013: Milk. Determination of calcium content. Titrimetric method

GOST ISO 14156-2015: Milk and milk product. Methods for extracting lipids and liposoluble compounds

GOST ISO 20847-2014: Petroleum products. Determination of sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry

GOST ISO 2719-2017: Oil products and other liquils. Determination of flash point. Pensky-Martens closed cup methods

GOST ISO 6785-2015: Milk and dairy products. Detection of Salmonella spp

GOST ISO 750-2013: Fruit and vegetable products. Determination of titratable acidity

GOST ISO 8754-2013: Oil products. Determination of sulphur using power dispersion roentgen fluorescent spectrometry.

GOST ISO 9000-2011: Quality management systems. Fundamentals and vocabulary

GOST ISO 9001-2011: Quality management systems. Requirements

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 1.8-2011: Standardization in Russian Federation. Interstate standards. Rules of developing, application, renovation and cease of application in the Russian Federation

GOST R 7.0.0-2010: System of standards on information, librarianship and publishing. National system of standards on information, librarianship and publishing. Main principles

RD 52.18.617-2015: Organization and order of conducting the monitoring

GOST 1.6-2019: Interstate standardization system. Interstate Standardization Program. Rules for the formation, adoption, amendment and monitoring of implementation

GOST 10637-2019: Chipboards and wood-fiber boards. Method for determining the specific resistance to pulling nails and screws

GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications

GOST 11069-2019: Primary aluminum. Grades

GOST 11126-2019: Coke-chemical raw materials for the production of carbon black. Technical specifications

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 11679.2-2019: Rubber-metal instrument dampers. Fittings. Technical specifications

GOST 12.4.122-2020: Occupational safety standards system. Personal respiratory protection. Gas and combined filters of large size. General specifications

GOST 12338-2020: Iridium powder refined. Specifications

GOST 12730.5-2018: Concrete Methods for determining water resistance

GOST 13996-2019: Ceramic tiles. General specifications

GOST 15136-2020: Refractory products. Methods for measuring the depth of bumping of corners and edges

GOST 1581-2019: Portland cement grouting. Technical specifications

GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water

GOST 1811-2019: Ladders for building sewage systems. Technical specifications

GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications

GOST 21.508-2020: System of design documents for construction. Rules for the implementation of working documentation for master plans of enterprises, structures and housing and civil objects

GOST 21314-2020: Vegetable oils. Production. Terms and Definitions

GOST 2211-2020: Refractories and refractory raw materials. Methods for determining true density

GOST 23671-2020: Limestone for the glass industry. Specifications

GOST 23673.2-2020: Dolomite for the glass industry. Methods for the determination of iron oxide

GOST 23673.5-2020: Dolomite for the glass industry. Moisture determination method

GOST 23673.6-2020: Dolomite for the glass industry. Method for determination of weight loss on ignition

GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules

GOST 24033-2018: Windows, doors and gates. Mechanical test methods

GOST 24334-2020: Power cables for non-stationary laying. General technical requirements

GOST 24468-2020: Refractory products. Method for determining the apparent density and total porosity of thermal insulation products

GOST 24846-2019: Soils. Methods for measuring deformations of the foundations of buildings and structures

GOST 25645.113-2019: The ionosphere of the Earth. Terms and Definitions

GOST 25749-2020: Metal screw covers. General specifications

GOST 27180-2019: Ceramic tiles. Test methods

GOST 27588-2020: Coal coke. Method for determination of total moisture

GOST 27589-2020: Coke. Method for determination of moisture in an analytical sample

GOST 27798-2019: Alumina. Sampling and preparation

GOST 28674-2019: Peas. Technical specifications

GOST 28786-2019: Wooden and combined door blocks. Determination of properties in various climatic conditions

GOST 28946-2020: Coal coke. Drop Strength Method

GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications

GOST 31272.1-2018: Hoisting cranes. Training of crane operators (operators). Part 1. General Provisions

GOST 31272.3-2019: Hoisting cranes. Training of crane operators (operators). Part 3. Tower cranes

GOST 31358-2019: Dry building floor mixes. Technical specifications

GOST 31610.13-2019: Explosive atmospheres. Part 13. Protection of equipment with rooms under excessive pressure "p" and rooms with artificial ventilation "v"

GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications

GOST 32624-2020: Crown covers. General specifications

GOST 32700-2020: Railway rolling stock. Adhesion control methods

GOST 33194-2014: Oil and oil products. Determination of sulfur content by X-ray fluorescence spectrometry with wave dispersion

GOST 33652-2019: Lifts Special requirements for safety and accessibility for people with disabilities and other people with limited mobility

GOST 33653-2019: Lifts Special safety requirements. Vandal proof

GOST 33787-2019: Equipment of railway rolling stock. Shock and vibration test

GOST 34262.1.3-2019: Household gas appliances for cooking. Part 1-3. Safety of appliances with glass ceramic hobs

GOST 34262.1.4-2019: Household gas appliances for cooking. Part 1-4. Safety of appliances having one or more burners with an automatic burner control system

GOST 34463.1-2018: Hoisting cranes. Safe operation. Part 1. General Provisions

GOST 34463.3-2019: Hoisting cranes. Safe operation. Part 3. Tower cranes

GOST 34463.4-2018: Hoisting cranes. Safe operation. Part 4. Jib cranes

GOST 34464.4-2018: Hoisting cranes. Information available upon request. Part 4. Jib cranes

GOST 34465.1-2018: Hoisting cranes. Governing bodies. Location and features. Part 1. General Provisions

GOST 34465.2-2018: Hoisting cranes. Governing bodies. Location and features. Part 2. Self-propelled jib cranes

GOST 34465.3-2019: Hoisting cranes. Governing bodies. Location and features. Part 3. Tower cranes

GOST 34465.4-2018: Hoisting cranes. Governing bodies. Location and features. Part 4. Jib cranes

GOST 34485-2018: Single vehicles. Identification Marking

GOST 34486.1-2018: Lifts Rules and methods of research (testing) and measurements. Motion Quality Measurement

GOST 34486.2-2018: Escalators and passenger conveyors. Rules and methods of research (testing) and measurements. Motion Quality Measurement

GOST 34488-2018: Small freight elevators. General safety requirements for the device and installation

GOST 34524-2019: Rails are railway. Non-destructive testing in operating conditions. General requirements

GOST 34576-2019: Flat wooden pallets. Quality fasteners to assemble new and repair used wooden pallets

GOST 34577-2019: Pallets for cargo. Laying sheets for pallets. General specifications

GOST 34578-2019: Glass packaging. Throat whisk for vacuum capping. Type 77 - Standard

GOST 34579-2019: Animals. Laboratory diagnosis of brucellosis. Allergic method

GOST 34580-2019: Lifts Special requirements for accessibility for disabled people and other people with limited mobility during overhaul and adaptation of buildings and structures

GOST 34581-2019: Lifts Special safety requirements when installing new elevators in existing buildings

GOST 34582-2019: Lifts Rules and methods for tests, measurements and checks before commissioning

GOST 34583-2019: Lifts Rules and methods of tests, measurements and checks during operation

GOST 34586.1-2019: Hoisting cranes. Graphic symbols. Part 1. General Provisions

GOST 34586.2-2019: Hoisting cranes. Graphic symbols. Part 2. Self-propelled jib cranes

GOST 34586.3-2019: Hoisting cranes. Graphic symbols. Part 3. Tower cranes

GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements

GOST 34588-2019: Hoisting cranes. Warning signs and pictograms. General principles

GOST 34589-2019: Hoisting cranes. Overhead and gantry cranes. General technical requirements

GOST 34592-2019: Food products, food raw materials. Methods for determination of insectoacaricides

GOST 34593-2019: Security doors. General technical requirements and test methods for resistance to burglary, explosion and bullet resistance

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34596-2019: Food products, feed, food raw materials. Determination of the mass fraction of methylmercury compounds and inorganic mercury compounds by high performance liquid chromatography - inductively coupled plasma mass spectrometry

GOST 34597-2019: Anode grounding of installations of electrochemical protection against corrosion of underground metal structures. Methods for determining the biocorrosive aggressiveness of soils and their impact on underground metal structures

GOST 34608-2019: Safety and control devices for gas burners and gas-burning appliances. Automatic shut-off valves for operating pressures above 500 to 6300 kPa inclusive

GOST 34609-2019: Ball valves and taps with cone closing element with manual control for gas installations in buildings

GOST 34611-2019: Pipe fittings. Earthquake Testing Methodology

GOST 34614.10-2019: Equipment and coverings for playgrounds. Part 10. Additional safety requirements and test methods for fully enclosed gaming equipment

GOST 34614.5-2019: Equipment and coverings for playgrounds. Part 5. Additional safety requirements and carousel test methods

GOST 34617-2019: Specialized food products. Cottage cheese with components for feeding young children. Technical specifications

GOST 34618-2019: Specialized food products on a grain basis. Determination of T-2 and HT-2 toxins by HPLC-MS with immunoaffinity column purification

GOST 34620-2019: Specialized food products. Mixtures based on soy protein isolate for feeding children in their first year of life. General specifications

GOST 34621-2019: Specialized food products. Drinks protein, protein-carbohydrate and carbohydrate-protein dry for athletes. General specifications

GOST 34622-2019: Specialized food products. Isotonic drinks for athletes. General specifications

GOST 34623-2019: Specialized food products, biologically active food additives. Method for determination of proanthocyanidin

GOST 34624-2019: Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems

GOST 34625-2019: Gear lever brake traction rolling stock. General specifications

GOST 34626-2019: Locomotives and self-propelled special railway rolling stock. Methods for determining the efficiency and power efficiency

GOST 34627-2019: Power semiconductor converters for diesel rolling stock. General parameters and general requirements

GOST 34628-2019: Springs and spring suspension kits for railway rolling stock. Strength calculation methods for longitudinal and combined loads

GOST 34632-2020: Freight cars. Reliability Performance Test Method

GOST 34636-2020: Pipe billet. General specifications

GOST 34643-2020: Pipes and pipeline parts made of thermosetting plastics reinforced with fiberglass. Method for determination of long-term specific annular creep stiffness and creep coefficient when exposed to moisture or in dry conditions

GOST 34644-2020: Pipes and pipeline parts made of thermosetting plastics reinforced with fiberglass. Methods for determining the chemical resistance of the inner surface under loading conditions

GOST 34645-2020: Pipes and pipeline parts made of thermosetting plastics reinforced with fiberglass. Methods for obtaining the hydrostatic design basis and the calculated pressure value

GOST 34646-2020: Glass fiber reinforced thermosetting pipes. Method for determination of resistance to cyclic internal pressure

GOST 34648-2020: Fiber-reinforced thermosetting plastics pipes and pipeline parts. Methods for determining the resistance of pipes and fittings to short-term effects of internal hydraulic pressure

GOST 34649-2020: Cold-rolled steel thin-sheet products, galvanized with polymer coating from continuous lines. Specifications

GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods

GOST 34651-2020: Railway rolling stock. Methods for monitoring the tightness of containers and pipelines of fuels and lubricants, working and cooling liquids

GOST 34653-2020: Glass packaging. Neck whisk for vacuum sealing. Type 82 - standard

GOST 34654-2020: Glass packaging. Neck whisk for vacuum sealing. Type 89 - standard

GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods

GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods

GOST 3476-2019: Granulated blast furnace and electrothermophosphoric slags for cement production

GOST 3634-2019: Manholes for manholes and storm water inlets for stormwater wells. Technical specifications

GOST 3808.1-2019: Softwood lumber and blanks. Atmospheric drying and storage

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST 4069-2020: Refractories and refractory raw materials. Methods for determining refractoriness

GOST 5445-2020: Chemical coking products. Acceptance rules and sampling methods

GOST 5578-2019: Crushed stone and sand from slag of ferrous and non-ferrous metallurgy for concrete. Technical specifications

GOST 5686-2020: Soils. Field test methods by piles

GOST 6235-2020: Nickel sheets and strips. Specifications

GOST 6263-2020: Chemical coking products. Method for determination of total sulfur

GOST 7022-2019: Semolina. Technical specifications

GOST 7066-2019: Food lentils. Technical specifications

GOST 7319-2019: Lumber and hardwood blanks. Atmospheric drying and storage

GOST 7847-2020: Coal tar pitch. Method for determination of mass fraction of substances insoluble in toluene

GOST 7871-2019: Welding wire of aluminum and aluminum alloys. Technical specifications

GOST 8.315-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition and properties of substances and materials. Key Points

GOST 8.664-2019: State system for ensuring the uniformity of measurements. Food products. Radiation processing of food products. Dosimetry requirements

GOST 839-2019: Uninsulated wires for overhead power lines. Technical specifications

GOST 8824-2018: Small freight elevators. Key parameters and dimensions

GOST 8929-2020: Coal coke. Method for determining strength

GOST 8935-2020: Coke nut. Specifications

GOST 9498-2019: Flat bars of aluminum and aluminum wrought alloys for hire. Technical specifications

GOST 9950-2020: Coal tar pitch. Methods for determining the softening point

GOST EN 12015-2020: Electromagnetic compatibility. Standard for a group of homogeneous products for elevators, escalators and passenger conveyors. Electromagnetic emission

GOST EN 12016-2020: Electromagnetic compatibility. Standard for a group of homogeneous products for elevators, escalators and passenger conveyors. Immunity

GOST EN 1601-2017: Liquid petroleum products. Unleaded gasoline. Determination of organic oxygen-containing compounds and the total content of organically bound oxygen by gas chromatography using a flame ionization oxygen detector (O-FID)

GOST IEC 60064-2019: Tungsten incandescent lamps for household and similar general lighting. Operational requirements

GOST IEC 60335-2-14-2020: Household and similar electrical appliances. Safety. Part 2-14. Particular requirements for kitchen machines

GOST IEC 60335-2-40-2020: Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electric heat pumps, air conditioners and dryers

GOST IEC 60335-2-87-2019: Household and similar electrical appliances. Security. Part 2-87. Particular requirements for electrical equipment for stunning livestock

GOST IEC 60598-2-13-2019: Lamps. Part 2-13. Private requirements. Lamps deepened in soil

GOST IEC 60598-2-4-2019: Lamps. Part 2-4. Private requirements. General purpose portable luminaires

GOST IEC 60730-2-13-2019: Automatic electrical control devices. Part 2-13. Particular requirements for humidity sensitive control devices

GOST IEC 60900-2019: Work under tension. Hand tools for working with voltages up to 1000 V AC and 1500 V DC. General requirements and test methods

GOST IEC 61000-4-31-2019: Electromagnetic compatibility (EMC). Part 4-31. Testing and measurement methods. Immunity Test for Broadband Conductors Interfering with AC Power Ports

GOST IEC 61000-4-39-2019: Electromagnetic compatibility (EMC). Part 4-39. Testing and measurement methods. Radiated fields in the immediate vicinity. Immunity Test

GOST IEC 61000-6-7-2019: Electromagnetic compatibility (EMC). Part 6-7. General standards. Immunity requirements for equipment designed to perform functions in a safety-related system (functional safety) in industrial locations

GOST IEC 61228-2019: Ultraviolet fluorescent lamps for tanning. Performance Measurement Method and Requirements

GOST IEC 62776-2019: Double-ended LED lamps for replacing linear fluorescent lamps. Safety requirements

GOST IEC 62841-2-1-2019: Electric, manual, portable and garden machines. Safety and test methods. Part 2-1. Particular requirements for manual drilling and hammer drilling machines

GOST IEC/TR 61000-3-14-2019: Electromagnetic compatibility (EMC). Part 3-14. Assessment of emission standards for harmonics, interharmonics, voltage fluctuations and asymmetries when connecting interfering installations to low-voltage power supply systems

GOST IEC/TR 61000-3-6-2020: Electromagnetic compatibility (EMC). Part 3-6. Norms. Evaluation of electromagnetic emission standards for connecting interfering installations to medium, high and extra-high voltage power supply systems

GOST IEC/TR 61000-3-7-2020: Electromagnetic compatibility (EMC). Part 3-7. Norms. Evaluation of electromagnetic emission standards for connecting installations that create voltage fluctuations to power supply systems of medium, high and extra-high voltage

GOST ISO 10619-2-2020: Rubber and plastic hoses and tubes. Measurement of flexibility and stiffness. Part 2. Low temperature bending test

GOST ISO 11001-1-2019: Agricultural wheeled tractors. Three point couplers. Part 1. U-shaped hitch

GOST ISO 1304-2019: The ingredients of the rubber compound. Technical carbon. Determination of the number of adsorption of iodine

GOST ISO 14171-2020: Welding materials. Solid wires, flux-cored wires and wire / flux combinations for submerged arc welding of unalloyed and fine-grained steels. Classification

GOST ISO 14341-2020: Welding materials. Gas-shielded consumable arc welding wires and weld metal of unalloyed and fine-grained steels. Classification

GOST ISO 1437-2019: The ingredients of the rubber compound. Technical carbon. Sieve residue determination

GOST ISO 15609-3-2020: Specifications and qualification of welding procedures for metallic materials. Technical requirements for the welding procedure. Part 3. Electron beam welding

GOST ISO 15609-5-2020: Specifications and qualification of welding procedures for metallic materials. Technical requirements for the welding procedure. Part 5. Resistance welding

GOST ISO 1629-2019: Rubber and latexes. Nomenclature

GOST ISO 17480-2020: Packaging. Available design. Easy opening. General requirements and test methods

GOST ISO 1827-2019: Rubber and thermoplastics. Determination of shear modulus and bond strength with rigid plates. Four-element sample shift methods

GOST ISO 1927-1-2019: Refractories unformed (ready to use). Part 1. Terms and classification

GOST ISO 1927-2-2019: Refractories unformed (ready to use). Part 2. Sampling for testing

GOST ISO 20846-2016: Liquid petroleum products. Determination of sulfur content in automotive fuels. Ultraviolet fluorescence method

GOST ISO 20884-2016: Liquid petroleum products. Determination of sulfur content in automotive fuels. Method of X-ray fluorescence spectrometry with wavelength dispersion

GOST ISO 283-2019: Rubber conveyor belts. Determination of tensile strength over the entire thickness, elongation at break and elongation at standard load

GOST ISO 3679-2017: Petroleum products and other liquids. Accelerated method for determining the flash point in a closed crucible under equilibrium conditions

GOST ISO 4675-2019: Fabrics with rubber or plastic coating. Low temperature bend test

GOST ISO 506-2019: Concentrate of natural rubber latex. Method for determining the number of volatile fatty acids

GOST ISO 5675-2019: Tractors and agricultural machinery. General Purpose Quick Couplings

GOST ISO 6079-2019: Instant tea. Technical specifications

GOST ISO 6321-2019: Animal and vegetable fats and oils. Determination of the melting temperature in open capillaries (sliding temperature)

GOST ISO 6848-2020: Arc welding and cutting. Non-consumable tungsten electrodes. Classification

GOST ISO 703-2019: Conveyor belts. Determination of lateral flexibility (tray forming ability)

GOST ISO 8009-2019: Mechanical contraceptives. Reusable rubber and silicone diaphragms. Technical requirements and test methods

GOST ISO 9692-2-2020: Welding and related processes. Types of connection preparation. Part 2. Submerged arc welding

GOST ISO 9692-3-2020: Welding and related processes. Types of connection preparation. Part 3. Arc welding in inert gas with consumable and tungsten electrode of aluminum and its alloys

GOST ISO Guide 31-2019: Standard samples. Contents of certificates, labels and accompanying documentation

GOST ISO Guide 33-2019: Standard samples. Good practice for using reference materials

GOST ISO/IEC 17025-2019: General competency requirements for testing and calibration laboratories

GOST ISO/TR 15608-2020: Welding. Metallic Material Grouping System Guide

Letter 1637-IK/03: Possible misprints in GOST 31468-2012, GOST 31659-2012, GOST 32064-2013, GOST 32149-2013

Letter 2025-OG/03: About the presence of a typo in GOST 28566-90

Letter 2036-OG/03: About the presence of a typo in GOST 18907-73

Letter 2218-OG/03: About the presence of a typo in GOST 23558-94

Letter 2253-OG/03: About the presence of a typo in GOST 9573-2012

Letter 2990-OG/03: About a typo in GOST 7217-87

Letter 3021-OG/03: About a typo in GOST EN 13836-2015

Letter 3068-OG/03: About a typo in GOST 22512-77

Letter 3104-OG/03: About a typo in GOST 4517-2016

Letter 3115-OG/03: About a typo in GOST 2477-2014

Letter 3200-OG/03: About a typo in GOST 12208-66

Letter 3201-OG/03: About a typo in GOST 29175-91

Letter 3231-OG/03: About a typo in GOST R 53901-2010

ODM 218.1.001-2020: Recommendations for the development and application of technical regulation documents in the field of road facilities

ODM 218.1.002-2020: Recommendations for the organization and conduct of work on standardization in the field of road facilities

Order 2907: On approval of the procedure for establishing and changing the interval between verifications of measuring instruments, the procedure for establishing, canceling calibration procedures and amending them, requirements for methods for verifying measuring instruments

PMG 06-2019: The procedure for the recognition of test results and type approval, initial verification, metrological certification of measuring instruments

RMG 115-2019: State system for ensuring the uniformity of measurements. Calibration of measuring instruments. Algorithms for processing measurement results and estimating uncertainty

RMG 144-2019: State system for ensuring the uniformity of measurements. Ensuring the uniformity of measurements of the absorbed dose of ionizing radiation during radiation processing of food products. General requirements

RMG 91-2019: State system for ensuring the uniformity of measurements. Use of the concepts “measurement error” and “measurement uncertainty”. General principles

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Degrees of protection provided by enclosures (IP Code)
Language: English
Price: $195.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!