imgalt

GOST 10181-2014

ГОСТ 10181-2014

Concrete mixtures. Methods of testing

Смеси бетонные. Методы испытаний

Status: Effective - Supersedes. IUS 7-2015

This standard applies to concrete mixes of heavy, fine-grained and lightweight concrete, manufactured according to GOST 7473, and establishes the rules for sampling and methods for determining workability, average density, porosity, stratification, temperature and persistence properties of concrete mix. This standard does not apply to concrete mixtures of large-pore and cellular concrete, polystyrene concrete and self-compacting concrete mixtures.

Настоящий стандарт распространяется на бетонные смеси тяжелого, мелкозернистого и легкого бетонов, изготовляемые по ГОСТ 7473, и устанавливает правила отбора проб и методы определения удобоуклады-ваемости, средней плотности, пористости, расслаиваемости, температуры и сохраняемости свойств бетонной смеси. Настоящий стандарт не распространяется на бетонные смеси крупнопористого и ячеистого бетонов, полистиролбетона и самоуплотня-ющиеся бетонные смеси

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/11/2014

SKU: RUSS138254

Price: $510.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »


As a Replacement Of:

GOST 10181-2000: Concrete Mixtures Test method

The Document References:

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 13646-68: Glass mercury thermometers designed for precise measurements

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 310.2-76: Cements. Methods of grinding fineness determination

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8735-88: Sand for construction work. Testing methods

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 18980-2015: Reinforced concrete collar beams for multistory buildings. Specifications

GOST 20213-2015: Reinforced concrete roof trusses. Specifications

GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications

GOST 20910-2019: Concrete is heat-resistant. Technical specifications

GOST 24893-2016: Reinforced concrete frame brace for industrial buildings. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25214-2021: Dense silicate concrete. Technical specifications

GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 27006-2019: Concrete Rules for the selection of composition

GOST 27108-2016: Frame structures of reinforced concrete, prefabricated for multi-stored buildings with beams. Specification

GOST 28013-98: Mortars. General specifications

GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications

GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 34366-2017: Main pipeline transport of oil and oil products. Quality control of construction and installation works. Main provisions

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions

GOST 5802-86: Mortars. Test methods.

GOST 9561-2016: Reinforced concrete multihollow panels for floors in buildings. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56587-2015: Concrete mixtures. Method for determination of time of setting

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications

GOST R 57360-2016: Prefabricated reinforced concrete constructions. Determination of compression strength of concrete

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

GOST R 58397-2019: General automobile roads. Rules for the production of work. Conformity assessment

GOST R 58411-2019: Flexible concrete slabs. Technical specifications

GOST R 58766-2019: Building solutions. General specifications

GOST R 58767-2019: Building solutions. Test Methods

GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications

GOST R 58895-2020: Concrete is chemically resistant. Specifications

GOST R 59535-2021: Concrete is heavy and fine-grained, dispersed-reinforced with steel fiber. Technical conditions

GOST R 59715-2022: Self-compacting concrete mixtures. Test methods

GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters

GOST R 70222-2022: Heavy concretes. Technical conditions

GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements

GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses

PNST 213-2017: Nanomaterials. Fresh concrete nanomodified for protective concrete. Technical requirements and test methods

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair

SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 45.13330.2017: Earthworks, grounds and footings

SP 46.13330.2012: Bridges and pipes

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

SP 80.13330.2016: River hydraulie engineering facilities

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English
Price: $240.00
imgalt
Main-line diesel locomotives. General technical requirements.
Language: English
Price: $514.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English
Price: $254.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English
Price: $386.00
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English
Price: $542.00
imgalt
Locomotives. Requirements for strength and dynamic qualities
Language: English
Price: $808.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!