GOST 12.2.063-2015
ГОСТ 12.2.063-2015
|
|
Pipeline valves. General safety requirements
Арматура трубопроводная. Общие требования безопасности
Status: Effective - Introduced for the first time. IUS 2-2016
This standard applies to pipeline valves and actuators for it and establishes general safety requirements for its design, manufacture, installation, operation, repair, transportation, storage and disposal.
Настоящий стандарт распространяется на трубопроводную арматуру и приводные устройства к ней и устанавливает общие требования безопасности при её проектировании, изготовлении, монтаже, эксплуатации, ремонте, транспортировании, хранении и утилизации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/26/2015
SKU: RUSS138280
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
10. Production »
10.1 General manufacturing issues »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
Standards for pipe fittings (TPA) »
14. Operation and repair of injection molding machines »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
1.3 Reliability and safety »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.01 Pipe fittings in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.01 Pipe fittings in general »
The Document References:
GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 2171-90: Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade designation
GOST 21744-83: Multilayer metal bellows. General specifications
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 2787-75: Recycled ferrous metals
GOST 30774-2001: Conservation of Resources. Waste Handling. Waste Hazard Registration Certificate General
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
GOST 34233.3-2017: Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting
GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
GOST 34233.5-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads
GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9544-2015: Pipeline valves. Leakage rates of valves
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50891-96: Machine reducers. General specifications
GOST R 51317.2.4-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Compatibility levels for low-frequency conducted disturbances in industrial plants
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51901.12-2007: Risk management. Procedure for failure mode and effects analysis
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST R 52857.2-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic, shells convex and flat bottoms and covers
GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 52857.5-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads
GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons
GOST R 53679-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials
GOST R 54123-2010: Safety of machinery and equipment. Terms, definitions and basic indications of safety
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PB 03-246-98: Rules for audit of industrial safety
PB 03-517-02: Regulations for Organizations Executing Activity in the Field of Industrial Safety at Hazardous Production Facilities
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-583-03: Rules for Development, Production and Application of Membranous Safety Equipment
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
SP 33.13330.2012: Steel pipelines strength analysis
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 013-2007: Pipe fittings. Welding of fittings to the pipeline. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys
ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process
ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 031-2009: Pipe fittings. Passport. Development and design rules
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 072-2009: Pipe fittings. Torques and dimensions of flywheels and handles
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications
GOST 11614-2019: Semi-automatic flush taps. Technical specifications
GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water
GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34011-2024: Gas distribution systems. Gas regulator units. Closet gas reducing units. General technical requirements
GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications
GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications
GOST 34294-2017: Cryogenic pipeline valves. General specifications
GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions
GOST 34569-2019: The main pipeline transport of oil and oil products. Devices for discharge of bulk oil and petroleum products. General specifications
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34612-2019: Pipe fittings. Passport. Rules for development and design
GOST 34670-2020: Gas distribution systems. Gas reduction points. Basic Provisions
GOST 34715.1-2021: Gas distribution systems. Design, construction and liquidation of natural gas distribution networks. Part 1. Polyethylene gas pipelines
GOST 34777-2021: Refrigerating systems and heat pumps. Valves. Requirements, tests and marking
GOST 34818-2021: Pipeline valves. Testing during installation, commissioning and operation
GOST 34859-2022: Pipeline valves. Guidelines for operation. The rules of execution
GOST 34904-2022: Ship pipeline valves. General specifications
GOST 35020-2023: Diesel locomotives operating on liquefied natural gas. General technical requirements
GOST 35022-2023: Shunting locomotives operating on liquefied natural gas. General technical requirements
GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators
GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements
GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements
GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
GOST R 58788-2019: Pipeline fittings of safety class 4 for technological systems of nuclear power plants. General technical requirements
GOST R 58819-2020: Pipe fittings for trunk oil pipelines and oil product pipelines. Rules for assessing the technical condition and extension of assigned indicators
GOST R 59064-2020: Pipe fittings. Ball valves for main oil pipelines and oil product pipelines. General specifications
GOST R 59125-2020: Pipe fittings. Safety valves for main oil pipelines and oil product pipelines. General specifications
GOST R 70236-2022: Pipeline valves. Shut-off valves of thermoplastic materials. General specifications
GOST R 70338-2022: Balancing valves for heating, heating, cooling and hot water internal systems. General technical conditions
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
Letter 1681/05-SM: About the application of the standards
MU 1.2.3.07.0057-2018: Composition and scope of testing of special valves and actuators for nuclear power plants. Guidelines
OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements
PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces
PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module
SP 100.13330.2016: The reclamation systems and construction
ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors
ST TsKBA 017-2005: Pipe fittings. General technical conditions
ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 039-2010: Pipe fittings. Periodic testing of bellows. General requirements
ST TsKBA 072-2009: Pipe fittings. Torques and dimensions of flywheels and handles
ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications
ST TsKBA 116-2015: Pipe fittings. Reliability tests. Recommendations on the development of the program and test methods
ST TsKBA 117-2017: Pipe fittings. Methods of hydraulic calculation of check valves and gates
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.