GOST 12.4.259-2014
ГОСТ 12.4.259-2014
|
|
Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals. (Types 6 and PB [6])
Система стандартов безопасности труда. Одежда специальная для защиты от жидких химических веществ. Эксплуатационные требования к одежде для химической защиты, обеспечивающей ограниченную защиту от жидких химических веществ (типы 6 и РВ [6])
Status: Effective - Introduced for the first time. IUS 9-2015
The standard establishes requirements for protective clothing with limited protective action against chemicals. This workwear is used with possible exposure to liquid chemicals only in the form of individual splashes, liquid aerosols or droplets falling with low pressure, for which protection is not required impermeability of the material (at the molecular level). The standard does not regulate the requirements for protective clothing against intensive irrigation, jets, pouring liquid chemicals, as well as from gases and vapors. The standard applies to protective clothing against chemicals (type 6) and products designed to protect certain parts of the body (type PB [6])
Стандарт устанавливает требования к спецодежде с ограниченным защитным действием по отношению к химическим веществам. Данная спецодежда применяется при возможном воздействии жидких химических веществ только в виде отдельных брызг, жидких аэрозолей или падающих с низким давлением капель, для защиты от которых не требуется непроницаемости материала (на молекулярном уровне). Стандарт не регламентирует требования к спецодежде, защищающей от интенсивного орошения, струи, облива жидкими химическими веществами, а также от газов и паров. Стандарт распространяется на спецодежду для защиты от химических веществ (тип 6) и изделий, предназначенных для защиты отдельных частей тела (тип РВ [6])
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/25/2014
SKU: RUSS138287
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.3 Special protective clothing »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.280 Protection against radiation »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.280 Protection against radiation »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
GOST 12.4.218-2002: Occupational safety standards system. Personal protection equipment. Method for determination of materials penetrability in aggressive media
GOST 12.4.241-2013: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST 12.4.251-2013: Occupational safety standards system. Protective clothing overalls for protection from acid solutions. Technical requiremеnts
GOST 28073-89: Sewing articles. Methods for the determination of breaking load, elongation of thread seams, slippage of fibre trends in seams
GOST 30303-95: Fabrics coated with rubber or plastics. Determination of breaking strength and elongation at break
GOST 30304-95: Fabrics coated with rubber or plastics. Determination of tear resistance
GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension
GOST 9913-90: Textile materials. Methods of determination of wear resistance
GOST EN 340-2012: Occupational safety standards system. Protective clothing. General requirements
GOST ISO 17491-4-2012: Occupational safety standards system. Protective clothing providing protection from chemicals. Part 4. Method for determination of resistance to penetration by a spray of liquid (spray test)
GOST ISO 3758-2010: Textiles. Care labelling code using symbols
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
Customers Who Viewed This Item Also Viewed:
 |
Fastening parts for detachable connections of nuclear power plants. Specifications.
Language: English |
Environment. Water quality. Waste water to supply to the sewerage system. General requirements
Language: English |
Hot-rolled sheet. Range
Language: English |
Unified system for design documentation. Specifications
Language: English |
The liquids for electronic nicotine delivery systems. General specifications
Language: English |
Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
Language: English |
Metals. Method for testing the impact strength at the low, room and high temperature
Language: English |
Carbon structural quality steel gauged bars with special surface finish. General specifications
Language: English |
Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
Language: English |
Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
Language: English |
Slotters. Standards of accuracy and rigidity
Language: English |
Crane rails. Specifications
Language: English |
Construction in seismic regions
Language: English |
Loads and impacts
Language: English |
Cocoa-powder. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.