GOST 12.4.287-2015
ГОСТ 12.4.287-2015
|
|
Occupational safety standards system. Filter protective clothing from steams, gases of toxic substances. Specifications
Система стандартов безопасности труда. Фильтрующая защитная одежда от паров, газов токсичных веществ. Технические условия
Status: Effective - Introduced for the first time. IUS 10-2015
The standard applies to filter protective clothing made using chemical protective filtering and sorbing materials that protect the worker's skin from exposure to vapors, gases of toxic substances of skin resorptive action. The standard establishes test methods for FZOs from vapor, gases of toxic substances, in particular triethylamine, in dynamic conditions and air permeability. The standard does not apply to FZOs manufactured using a chemical protective filtering and sorbing material based on carbon sorbents. The standard does not apply to the following types of special FZO: - military; - fire; - medical.
Стандарт распространяется на фильтрующую защитную одежду, предназначенную для работы в условиях превышения установленных предельно допустимых концентраций вредных веществ в воздухе рабочей зоны в соответствии с ГОСТ 12.1.005. Стандарт распространяется на фильтрующую защитную одежду, изготовленную с использованием химзащитных фильтрующе-сорбирующих тканей на основе неуглеродных сорбентов и обеспечивающую защиту кожных покровов работника от воздействия паровой и газовой фазы токсичных химических веществ I, II, III классов опасности кожно-резорбтивного действия. Покровные слои фильтрующей защитной одежды защищают от открытого пламени или капель кислот с концентрацией до 50 %. Стандарт не распространяется на фильтрующую защитную одежду, изготовленную с использованием химзащитной фильтрующе-сорбирующей ткани на основе углеродных сорбентов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/11/2015
SKU: RUSS138316
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.3 Special protective clothing »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
The Document References:
GOST 10484-78: Reagents. Hydrofluoric acid. Specifications
GOST 10581-91: Ready-made sewing. Marking, packing, transportation and storage
GOST 10681-75: Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.031-84: Personal safety means. Determination of sort
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12.4.115-82: Occupational safety standards system. Personal safety means. General requirements for marking
GOST 12.4.251-2013: Occupational safety standards system. Protective clothing overalls for protection from acid solutions. Technical requiremеnts
GOST 12026-76: Filter paper for laboratory application
GOST 12807-2003: Sewing goods. Classification of stitches, stitching and seems
GOST 14192-96: Cargo marking
GOST 15.004-88: Personal means of protection
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 20490-75: Reagents. Potassium permanganate. Specifications
GOST 20757-91: Army uniforms. Tolerances for cutting out parts of special-purpose garments
GOST 21790-2005: Cotton and mixed fabrics for garments. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24363-80: Reagents. Potassium hydroxide. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 29122-91: Means of individual protection х
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 29298-2005: Cotton and mixed domestic fabrics. General specifications
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 31399-2009: Classification of standard men's figurеs by heights, sizes and full-bodied groups for projection of clothes
GOST 3765-78: Reagents. Ammonium molibdate. Specifications
GOST 4103-82: Ready-made sewing goods. Methods of quality control
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4514-78: Straps for electrical industry. Specifications
GOST 5839-77: Reagents. Sodium oxalate. Specifications
GOST 6309-93: Cotton and synthetic threads for sewing. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST EN 340-2012: Occupational safety standards system. Protective clothing. General requirements
GOST ISO 15025-2012: Occupational safety standards system. Protective clothing for protection against heat and flame. Method of test for limited flame spread
GOST ISO 3758-2010: Textiles. Care labelling code using symbols
GOST OIML R 111-1-2009: State system for ensuring the uniformity of measurement. Weights of accuracy classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1 Metrological and technical requirements.
GOST OIML R 76-1-2011: State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R ISO 3635-99: Clothes. Dimensions. Definitions, designation and measurement requirements
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 12.4.312-2017: Occupational safety standards system. The suits isolating multipurpose. General technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Fastening parts for detachable connections of nuclear power plants. Specifications.
Language: English |
Environment. Water quality. Waste water to supply to the sewerage system. General requirements
Language: English |
Hot-rolled sheet. Range
Language: English |
Unified system for design documentation. Specifications
Language: English |
The liquids for electronic nicotine delivery systems. General specifications
Language: English |
Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
Language: English |
Metals. Method for testing the impact strength at the low, room and high temperature
Language: English |
Carbon structural quality steel gauged bars with special surface finish. General specifications
Language: English |
Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
Language: English |
Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
Language: English |
Slotters. Standards of accuracy and rigidity
Language: English |
Crane rails. Specifications
Language: English |
Construction in seismic regions
Language: English |
Loads and impacts
Language: English |
Cocoa-powder. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.