GOST 26633-2015
ГОСТ 26633-2015
|
|
Heavy-weight and sand concretes. Specifications
Бетоны тяжелые и мелкозернистые. Технические условия
Status: Effective - Supersedes. IUS 8-2016
The standard applies to structural heavy and fine-grained concrete on cement binders and dense aggregates used in all areas of construction and climatic zones, and establishes the technical requirements for concrete, the rules for their acceptance, control methods. The standard does not apply to straining, large-pore, acid-resistant, heat-resistant, radiation-protective, especially heavy and dispersion-reinforced concrete.
Стандарт распространяется на конструкционные тяжелые и мелкозернистые бетоны на цементных вяжущих и плотных заполнителях, применяемые во всех областях строительства и климатических зонах, и устанавливает технические требования к бетонам, правила их приемки, методы контроля. Стандарт не распространяется на напрягающие, крупнопористые, кислотостойкие, жаростойкие, радиационно-защитные, особо тяжелые и дисперсно-армированные бетоны.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/17/2016
SKU: RUSS138526
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
As a Replacement Of:
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24316-80: Concrete. Methods of the determination of exothermic neat in concrete
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24545-81: Concretes. Methods of fatigue tests
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions
GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 29167-91: Concrete. The determination methods of fracture toughness characteristics
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31108-2016: General structural Portland clinker cements. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment
GOST 32495-2013: Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST 33174-2014: Automobile roads of general use. Cement. Technical requirements
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56592-2015: Mineral Admixtures for Concretes and mortars. General specifications
Letter 2939-OG/03: About the presence of a typo in GOST 26633-2015
The Document is Referenced By:
GOST 12730.5-2018: Concrete Methods for determining water resistance
GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications
GOST 17538-2016: Reinforced concrete constructions and products for lift shafts of residential buildings. Specification
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 20910-2019: Concrete is heat-resistant. Technical specifications
GOST 25214-2021: Dense silicate concrete. Technical specifications
GOST 25592-2019: Ashes and slag mixtures of thermal power plants for concrete. Technical conditions
GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions
GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27006-2019: Concrete Rules for the selection of composition
GOST 28013-98: Mortars. General specifications
GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 30353-2022: Floors. Test method for impact resistance
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32942-2014: Pre-stressed reinforced concrete bars for turnouts. General specifications
GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications
GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 35054-2023: Main pipeline transportation of oil and oil products. Buildings and structures. Design rules
GOST 3634-2019: Manholes for manholes and storm water inlets for stormwater wells. Technical specifications
GOST 5578-2019: Crushed stone and sand from slag of ferrous and non-ferrous metallurgy for concrete. Technical specifications
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications
GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications
GOST R 58277-2018: Dry mixes for building on cement binder. Test methods
GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions
GOST R 58336-2018: Anchor angles. Test methods
GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods
GOST R 58387-2019: Glue anchors for fastening in concrete. Test methods
GOST R 58411-2019: Flexible concrete slabs. Technical specifications
GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design
GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design
GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
GOST R 58895-2020: Concrete is chemically resistant. Specifications
GOST R 59290-2021: Automobile roads for general use. Requirements for conducting incoming and operational control
GOST R 59611-2021: Automobile roads for general use. Drainage system. Design requirements
GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements
GOST R 59715-2022: Self-compacting concrete mixtures. Test methods
GOST R 59945-2021: Factory made reinforced concrete piles of rectangular cross-section with cavity. Technical specifications
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
GOST R 70075-2022: Sealants for the organization of mounting joints of the joints of window units to the wall openings. Technical conditions
GOST R 70261-2022: Sub-tie gaskets for vibration isolation of track superstructure structures. Test methods
GOST R 70306-2022: Centrifuged reinforced concrete columns of circular section for industrial buildings and engineering structures. Technical specifications
GOST R 70311-2022: Public roads. Bridge structures. Rules for construction and strengthening of approach embankment cones
GOST R 70312-2022: Public roads. Bridge structures. Rules for design of interfaces with approach embankments
GOST R 70313-2022: Public roads. Bridge structures. Rules for the arrangement of staircases and operating facilities
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions
Letter 2939-OG/03: About the presence of a typo in GOST 26633-2015
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads
ODM 218.3.115-2019: Design and calculation of drainage trays of closed type for roads and airfields
ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures
ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards
ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads
PNST 213-2017: Nanomaterials. Fresh concrete nanomodified for protective concrete. Technical requirements and test methods
PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
PNST 663-2022: Public roads. Weighing and gauge control points of vehicles automatic. Design requirements
SP 100.13330.2016: The reclamation systems and construction
SP 120.13330.2012: Subway systems
SP 122.13330.2023: Railroad and road tunnels
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 17.13330.2017: The roofs
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 24.13330.2011: Pile foundations
SP 250.1325800.2016: Building and structures. Protection against groundwater
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 277.1325800.2016: Costal protection constructions. Design rules
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 288.1325800.2016: Forest roads. Rules of design and construction
SP 29.13330.2011: Floors
SP 335.1325800.2017: Large-panel construction system. Design rules
SP 337.1325800.2017: Composite precast and in-situ reinforced concrete construction. Design rules
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 37.13330.2012: Industrial transport
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules
SP 416.1325800.2018: Engineering protection of the shores of the tidal seas. Design rules
SP 425.1325800.2018: Engineering protection of territories from erosion processes. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 430.1325800.2018: Monolithic structural systems. Design rules
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 46.13330.2012: Bridges and pipes
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 78.13330.2012: Automobile roads
SP 96.13330.2016: Ferrocement structures
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.