GOST 30803-2014
ГОСТ 30803-2014
|
|
Transmission tooth gears of the traction railway stock. Specifications
Колеса зубчатые тяговых передач тягового подвижного состава. Технические условия
Status: Effective - Supersedes. IUS 9-2015
This standard applies to involute cylindrical drive and driven spur, helical gear and chevron gears or crowns of composite gears used in locomotive traction gears and rolling stock
Настоящий стандарт распространяется на эвольвентные цилиндрические ведущие и ведомые прямозубые, косозубые и шевронные зубчатые колеса или венцы составных зубчатых колес, применяемые в тяговых передачах локомотивов и моторвагонного подвижного состава
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/17/2015
SKU: RUSS138565
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.040 Materials and components for railway equipment »
National standards »
45 RAILWAY ENGINEERING »
45.040 Materials and components for railway equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D55 Frames, units and parts of rolling stock of railways »
As a Replacement Of:
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
The Document References:
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 13755-2015: Basic norm of interchangeability. Cylindrical gears for general and heavy engineering. Standard basic racks tooth profile
GOST 13755-81: Basic requirements for interchangeability. Gearings cylindrical evolvent gears. Basic rack
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1643-81: Cylindrical gears pairs. Accuracy
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19200-80: Iron and steel castings. Terms and definitions of defects
GOST 19905-74: Strengthening of hardware by surface chemical heat treatment. Contents of general requirements
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 23207-78: Fatigue strength. Terms, definitions and symbols
GOST 25.507-85: Strength calculation and testing in machine building. Methods of fatigue testing under service loading. General requirements
GOST 25706-83: Magnifiers
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts
GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures
GOST 34510-2018: Cogwheels of traction gears of traction rolling stock. Methods for determining bending and contact fatigue strength
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7566-94: Metal products
GOST 801-78: Bearing steel. Specifications
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9378-93: Roughness comparison specimens
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes
GOST R 56542-2015: Non-destructive testing. Classification of types and methods
The Document is Referenced By:
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications
GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures
Customers Who Viewed This Item Also Viewed:
 |
Petroleum for oil-processing plants. Specifications
Language: English |
Industrial gas burners. General technical requirements
Language: English |
Electrical articles. General requirement for environment mechanical stability
Language: English |
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English |
Power transformer on-load tap-changing devices. General specifications
Language: English |
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English |
Glass and glass products. Visual faults. Terms and definitions
Language: English |
Industrial gas burners. Test methods
Language: English |
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English |
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English |
Crude petroleum. General specifications
Language: English |
Power transformers. Test methods of tap changing devices
Language: English |
Unified system for design documentation. Stages of designing
Language: English |
White sugar. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English |
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.