imgalt

GOST 30970-2014

ГОСТ 30970-2014

Door blocks of polyvinylchloride profiles. Specifications

Блоки дверные из поливинилхлоридных профилей. Общие технические условия

Status: Effective - Supersedes. IUS 7-2015

This standard applies to door blocks of PVC profiles with canvases of the frame structure for buildings and structures for various purposes. The scope of specific types of door blocks, depending on the operating conditions in accordance with the applicable building codes and regulations, taking into account the requirements of this standard. This standard does not apply to balcony door blocks, as well as special-purpose door blocks in terms of additional requirements for fire safety, etc. This standard can be applied for product certification purposes.

Настоящий стандарт распространяется на дверные блоки из поливинилхлоридных профилей с полотнами рамочной конструкции для зданий и сооружений различного назначения. Область применения конкретных видов дверных блоков устанавливают в зависи-мости от условий эксплуатации в соответствии с действующими строительными нормами и правилами с учетом требований настоящего стандарта. Настоящий стандарт не распространяется на балконные дверные блоки, а также на дверные блоки специального назначения в части дополнительных требований к пожарной безопасности и др. Настоящий стандарт может быть применен для целей сертификации изделий

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/12/2014

SKU: RUSS138566

Price: $275.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.060 Construction elements » 91.060.50 Doors and windows »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.060 Construction elements » 91.060.50 Doors and windows »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh35 Constructions and parts from other materials »


The Document is Replaced With:

GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions

As a Replacement Of:

GOST 30970-2002: Doors of polyvinylchloride profiles. Specifications

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 111-2001: Flat glass. Specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 166-89: Vernier callipers. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission

GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission

GOST 26602.3-99: Windows and doors. Method of measurement of sound insulation

GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30698-2000: Glass tempered for building. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30778-2001: Rubber compression-types for windows and doors. Specifications

GOST 30826-2001: Laminated glass for building. Specifications

GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 31462-2011: Safety windows. General specifications

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5088-2005: Hinges for windows and doors. Specifications

GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications

GOST 538-2001: Locks and building hardware. General specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 9416-83: Building levels. Technical requirements

GOST R 54162-2010: Tempered glass. Specifications

GOST R 54170-2010: Clear flat glass. Specifications

GOST R 54171-2010: Laminated glass. Specifications

GOST R ISO 10140-1-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 1. Testing rules for specific products

GOST R ISO 10140-2-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 2. Measurement of airborne sound insulation

GOST R ISO 10140-3-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation

GOST R ISO 10140-4-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement methods and procedures

GOST R ISO 10140-5-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment

SP 20.13330.2011: Loads and impacts

The Document is Referenced By:

GOST 24033-2018: Windows, doors and gates. Mechanical test methods

GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions

GOST 31173-2016: Steel doors. Specifications

GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications

GOST R 70726-2023: Modular swimming pools. General technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!