imgalt

GOST 32805-2014

ГОСТ 32805-2014

Flexible rolled roofing bitumen-based materials. General specifications

Материалы гибкие рулонные кровельные битумосодержащие. Общие технические условия

Status: Effective - Supersedes. regarding the requirements for roofing bitumen-containing basic materials (IUS 5-2015)

This standard applies to flexible rolled roofing bitumen-containing basic materials intended for the construction of upper, intermediate and lower layers of the roofing carpet, and establishes terms and definitions, technical requirements, test methods, conformity assessment procedures, labeling requirements. This standard does not apply to materials intended for the installation of the lining waterproofing layer under roofed roofing products, as well as for the installation of waterproofing systems in which asphalt concrete is laid directly on the waterproofing material completely glued to the foundation at high temperatures.

Настоящий стандарт распространяется на гибкие рулонные кровельные битумосодержащие основные материалы, предназначенные для устройства верхних, промежуточных и нижних слоев кровельного ковра, и устанавливает термины и определения, технические требования, методы испытаний, процедуру оценки соответствия, требования к маркировке. Настоящий стандарт не распространяется на материалы, предназначенные для устройства подкладочного гидроизоляционного слоя под штучные кровельные изделия, а также для устройства гидроизоляционных систем, в которых непосредственно на гидроизоляционный материал, полностью приклеенный к основанию, укладывают асфальтобетонное покрытие при высоких температурах

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/26/2014

SKU: RUSS138737

Price: $430.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.91 Building materials and construction (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.91 Building materials and construction (Dictionaries) »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.50 Binders. Compactors »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.50 Binders. Compactors »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.99 Other building materials »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.99 Other building materials »


The Document References:

GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30402-96: Building materials Ignitability Test Meth

GOST 30444-97: Building materials. Spread flame test method

GOST 31897-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to dynamic loading

GOST 31898-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of resistance to tearing by nail shank

GOST 31899-1-2011: Roofing and waterproofing materials flexible bitumen-containing. Method for determining the deformation-strength properties

GOST 32315.1-2012: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of peel resistance of joints

GOST 32316.1-2012: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of shear resistance of joints

GOST 32317-2012: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method of agеing by exposure to the artificial climatic factors: UV-radiation, elevated temperature and water

GOST 32318-2012: Roofing and hydraulic-insulating flexible bitumen-based and holymeric (thermoplastic or elastomer) materials. Method for determination of water vapour transmission properties

GOST 32319-2012: Roofing and hydraulic-insulating flexible bitumen-based and holymeric (thermoplastic or elastomer) materials. Method for determination of resistance to root penetration

GOST EN 1107-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of linear dimensional change

GOST EN 1108-2012: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes

GOST EN 1109-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of flexibility at low temperature

GOST EN 1110-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of head resistance

GOST EN 12039-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of granules to coating layer adhesion

GOST EN 12730-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to static loading

GOST EN 1296-2012: Roofing and hydraulic-insulating flexible bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method of artificial thermal ageing

GOST EN 13416-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Rules for sampling

GOST EN 13897-2012: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness after stretching at low temperature

GOST EN 1848-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of length, width and straightness

GOST EN 1849-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area

GOST EN 1850-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of visual defects

GOST EN 1928-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness

GOST ISO 9001-2011: Quality management systems. Requirements

GOST R 51032-97: Building materials spread flame test method

The Document is Referenced By:

GOST R 58796-2020: Materials vapor barrier rolled bitumen-containing. General specifications

GOST R 59688-2022: Two-layer steel panels for building coverings with polyurethane foam insulation. Technical conditions

GOST R 70086-2022: Flexible roll-fed bitumen-containing waterproofing materials. General technical conditions

GOST R 70341-2022: Roofing works. Installation of roofs with a waterproofing layer of bituminous roll materials. Rules and control of work performance

GOST R 70434-2022: Polymeric profiled flexible protective and drainage materials. General technical conditions

SP 120.13330.2012: Subway systems

SP 17.13330.2017: The roofs

SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English
Price: $169.00
imgalt
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English
Price: $105.00
imgalt
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English
Price: $118.05
imgalt
Oil. General specifications
Language: English
Price: $132.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!