GOST 32935-2014
ГОСТ 32935-2014
|
|
Steel bellows expansion joints for heat networks. General specifications
Компенсаторы сильфонные металлические для тепловых сетей. Общие технические условия
Status: Effective - Introduced for the first time. IUS 9-2015
This standard applies to metal bellows compensators and bellows compensating devices for a nominal pressure of up to PN 25 (2.5 MPa) and for an operating temperature of 200 ° C, inclusive, with a nominal diameter from DN 50 to DN 1400, designed for tight connection with respect to moving elements compensation of temperature deformations of water heating networks and steam pipelines
Настоящий стандарт распространяется на компенсаторы сильфонные металлические и устройства сильфонные компенсационные на номинальное давление до PN 25 (2,5 МПа) и на рабочую температуру 200 °С, включительно, номинальным диаметром от DN 50 до DN 1400, предназначенные для герметичного соединения относительно перемещающихся элементов и компенсации температурных деформаций трубопроводов водяных тепловых сетей и паропроводов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/12/2014
SKU: RUSS138851
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.80 Seals for pipes and sleeves assembly »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.80 Seals for pipes and sleeves assembly »
The Document References:
Federal Law 190-FZ: About heat supply
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
Federal Law 89-FZ: Production and Consumption Wastes
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 22743-85: Siphons. Terms, definitions and letter symbols
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 25756-83: Bellows expansion joints and (bellows) seals. Terms and definitions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27036-86: Bellows metal expansion joints and seals
GOST 28338-89: Nominal bores (nominal sizes)
GOST 28697-90: Programme and test methods of bellows compensators and seals. General requirements
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 29329-92: Balance for static weightings
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-2005: Common quality carbon steel. Grades
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SP 124.13330.2012: Heating networks
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
PNST 790-2022: Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.