GOST 32960-2014

ГОСТ 32960-2014

Automobile roads of general use. Traffic load models, application of the load models

Дороги автомобильные общего пользования. Нормативные нагрузки, расчетные схемы нагружения

Status: Effective - Introduced for the first time. With the right of early application (IUS 9-2015)

This standard applies to the design of construction, reconstruction and overhaul of public roads and road structures on them and establishes for these roads the standard vertical loads from motor vehicles and design load schemes. This standard does not apply to the design of roads of industrial, construction, forestry and other industrial enterprises, as well as temporary highways for various purposes (constructed for a period of service of less than 5 years) and auto winter roads. Requirements of the standard are not the basis for the design of vehicles

Настоящий стандарт распространяется на проектирование строительства, реконструкции и капитального ремонта автомобильных дорог общего пользования и дорожных сооружений на них и устанавливает для этих дорог нормативные вертикальные нагрузки от автотранспортных средств и расчетные схемы нагружения. Настоящий стандарт не распространяется на проектирование дорог промышленных, строительных, лесных и иных производственных предприятий, а также временных автомобильных дорог различного назначения (сооружаемых на срок службы менее 5 лет) и автозимников. Требования стандарта не являются основанием для проектирования автотранспортных средств

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 4/7/2015

SKU: RUSS138859

Price: $151.00

English keywords: car roads; regulatory loads;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 93 Civil Engineering »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.01 Road construction in general »

National standards » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.01 Road construction in general »


The Document is Referenced By:

GOST 33100-2014: Public roads. Rules for design of highways

GOST 33161-2014: Automobile roads of general use. Requirements for diagnostics and certification of artificial structures on highways

GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design

GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design

GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation

GOST R 58829-2020: Automobile roads for general use. Viscous oil road bitumens. The rules for choosing brands depending on the projected traffic loads and climatic operating conditions based on additional indicators

GOST R 59120-2021: Automobile roads for general use. Travel clothing. General requirements

ODM 218.2.053-2015: Recommendations for seismic impact assessment in determining the sustainability of landslide sections of roads

ODM 218.2.062-2015: Recommendations for determining the parameters of design loads for modern vehicles

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction

ODM 218.2.098-2018: Guidelines for the use of a prestressed homogeneous system for strengthening slopes based on a high-strength steel network (more than 1770 N

ODM 218.2.103-2020: Guidelines for the use of expanded polystyrene in the design, construction and reconstruction of lightweight embankments on soft soils

ODM 218.2.104-2019: Album of typical constructions of non-rigid pavements in various climatic zones

ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures

ODM 218.3.1.001-2020: Methodological recommendations for the calculation of flexible grillage using geosynthetic materials. Basic provisions of calculations

ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils

ODM 218.3.120-2020: Methodical recommendations for the calculation of road embankments on soft base soils using geosynthetic materials

ODM 218.6.034-2019: Recommendations for designing motorway backups on approaches to large cities

PNST 265-2018: Automobile roads of general use. Flexible pavement design

PNST 390-2020: Automobile roads for general use. Non-rigid road clothes. Typical designs

PNST 663-2022: Public roads. Weighing and gauge control points of vehicles automatic. Design requirements

SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*

SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules

SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules

SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules

Customers Who Viewed This Item Also Viewed:

Metals. Methods of tension test
Language: English
Manual are welding. Welding joints. Main types, design elements and dimensions
Language: English
Vessels and apparatus. Norms and methods of strength calculation
Language: English
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $520.96
Welding steel wire. Specifications
Language: English
Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
Language: English
Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
Language: English
Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
Language: English
Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
Language: English
Steel and alloys. Methods for detection and determination of grain size
Language: English
Armour clothes. Classification and general technical requirements
Language: English
Price: $38.00
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
Language: English
Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
Language: English
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
Language: English
Armored clothing. Classification and general specifications
Language: English
Price: $217.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!