GOST 33200-2014

ГОСТ 33200-2014

Axles for wheelsets of railway rolling stock. General specifications

Оси колесных пар железнодорожного подвижного состава. Общие технические условия

Status: Effective - Supersedes. (IUS 11-2015); The introduction date was postponed from 11/01/2015 to 04/01/2016 information about registration 1719-st dated November 6, 2015 (the official site of Rosstandart) (IUS 2-2016)

This standard applies to draft axles and finishing axles of the UHL design according to GOST 15150 for wheel pairs of freight cars, passenger cars of locomotive traction, locomotives, motor rolling vehicle (hereinafter referred to as MVPS), special railway rolling stock (hereinafter ATP) and rolling stock of the metro

Настоящий стандарт распространяется на черновые оси и чистовые оси исполнения УХЛ по ГОСТ 15150 для колесных пар грузовых вагонов, пассажирских вагонов локомотивной тяги, локомотивов, моторвагонного подвижного состава (далее - МВПС), специального железнодорожного подвижного состава (далее - СПС) и подвижного состава метрополитена

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 45

Approved: Federal Agency for Technical Regulation and Metrology, 6/5/2015

SKU: RUSS138968

Price: $240.00




The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.3 Railway and tram locomotives, rail rolling stock »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »


As a Replacement Of:

GOST 22780-93: Car axles for 1520 (1524) mm gauge main-line railways. Types, parameters and dimensions

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 14192-96: Cargo marking

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 30552-98: Round billets (non-machined axles) of railway wheels for 1520 mm gauge line. Allowances and tolerances

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8233-56: Steel. Microstructure standards

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9378-93: Roughness comparison specimens

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

Instruction CV/3429: Instructions for inspection, survey, repair and formation of wagon wheelsets

RD: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524 mm) gauge mainline railways

The Document is Referenced By:

GOST 10935-2019: Cargo freight cars. General specifications

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications

GOST 33783-2016: Wheeled pairs of railway rolling stock. Methods for determination of strength indicators

GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

Customers Who Viewed This Item Also Viewed:

Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Language: English
Price: $13.00
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Language: English
Price: $8.00
Man-machine system Semigraphics General ergonomic requirements
Language: English
Price: $90.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $49.00
Occupational safety standards system. Means of protection. General requirements and classification
Language: English
Price: $38.00
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Language: English
Price: $38.00
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Language: English
Price: $13.00
Safety valves, control valves and pressure regulators. Face-to-face lengths
Language: English
Price: $41.00
Cables and cable fittings. Safety requirements
Language: English
Price: $18.00
Occupational safety standards system. Loading and unloading works General safety requirements
Language: English
Price: $43.00
Ventilation systems. General requirements
Language: English
Price: $28.00
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Language: English
Price: $23.00
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Language: English
Price: $76.00
Cargo marking
Language: English
Price: $216.00
Work area air
Language: English
Price: $58.00
General sanitary requirements for working zone air
Language: English
Price: $385.00
Fire safety. General requirements
Language: English
Price: $350.00
Electrical articles. Grounding terminals and grounding signs
Language: English
Price: $172.00
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
Language: English
Price: $135.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!