GOST 33258-2015

ГОСТ 33258-2015

Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

Арматура трубопроводная. Наплавка и контроль качества наплавленных поверхностей. Технические требования

Status: Effective - Introduced for the first time. IUS 2-2016

This standard covers surfacing of sealing and other surfaces with hard wear-resistant materials, surfacing of sealing and other surfaces with anti-corrosion materials in the manufacture of pipe fittings: - hazardous production facilities; -atomic stations of safety class 4; - other applications for different working environments. The standard establishes the basic requirements for surfacing materials, technologies for surfacing, heat treatment after surfacing, for quality control of weld surfaces and quality assessment standards, as well as for correction of defects in the manufacture of valves and after its operation. The standard lists the properties of the weld metal (physical properties, chemical composition, design specific loads and other characteristics of the weld metal) necessary for the calculation in the design of the valve assembly nodes. The performance of surfacing materials in various corrosive environments is specified in [1]. The standard is a guideline for designers, technologists, production and control masters; welding welders and other persons involved in the design, manufacture and operation of pipeline valves

Настоящий стандарт распространяется на наплавку уплотнительных и других поверхностей твердыми износостойкими материалами, на наплавку уплотнительных и других поверхностей антикоррозионными материалами при изготовлении трубопроводной арматуры: - опасных производственных объектов; -атомных станций 4 класса безопасности; - других областей применения для различных рабочих сред. Стандарт устанавливает основные требования к наплавочным материалам, технологии наплавки, термообработке после наплавки, к контролю качества наплавленных поверхностей и нормам оценки качества, а также к исправлению дефектов при изготовлении арматуры и после ее эксплуатации. В стандарте приведены свойства наплавленного металла (физические свойства, химический состав, расчетные удельные нагрузки и другие характеристики наплавленного металла), необходимые для расчета при проектировании узлов затвора трубопроводной арматуры. Работоспособность наплавочных материалов в различных коррозионных средах указана в[1]. Стандарт является руководящим документом для конструкторов, технологов, производственных и контрольных мастеров; сварщиков, выполняющих наплавку, и других лиц, связанных с проектированием, изготовлением и эксплуатацией трубопроводной арматуры

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 50

Approved: Federal Agency for Technical Regulation and Metrology, 5/26/2015

SKU: RUSS138999

Price: $651.00

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 10. Production » 10.4 Surfacing »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 1 Basic requirements for quality of products and services »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »

The Document References:

GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 11930.0-79: Hard-facind materials. General requirements for methods of analysis

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 18704-78: Boric acid. Specifications

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 21448-75: Alloyed powders for welding deposit. Specifications

GOST 21449-75: Rods for welding deposit. Specifications

GOST 2169-69: Silicon technical. Specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 24297-87: Input inspection of products. General provisions.

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 26101-84: Welding powdered wire

GOST 4421-73: Fluorite concentrate for welding materials. Specifications

GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8050-85: Carbon dioxide,

GOST 8429-77: Borax. Technical conditions

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9087-81: Welding melted fluxes

GOST R 52222-2004: Fused fluxes for automatic welding. Specifications

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

RB-090-14: Safety guide on nuclear energy use

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 054-2008: Pipe fittings. Construction materials for parts of pipeline valves operating in corrosive environments. Technical requirements

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!