GOST 33259-2015
ГОСТ 33259-2015
|
|
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Фланцы арматуры, соединительных частей и трубопроводов на номинальное давление до PN 250. Конструкция, размеры и общие технические требования
Status: Effective - Supersedes. IUS 2-2016
This standard applies to connecting flanges of pipe fittings (hereinafter referred to as valves), connecting parts and pipelines, as well as to connecting flanges of machines, equipment, instruments, pipes, apparatus and tanks for nominal pressure up to PN 250 and establishes the design and dimensions of steel and cast iron flanges, determines the types of flanges, the types of forms of sealing surfaces, sets the technical requirements for the manufacture, marking, testing and control. This standard provides guidance on the choice of material for flanges and fasteners for flange joints as well as on the choice of a sealing surface depending on the hazard and the parameters of the working medium. On the flanges for other objects, parameters and conditions of application are GOST 1536, GOST 4433, GOST 9399, GOST 25660, GOST 28759.1-GOST 28759.5, [1]
Настоящий стандарт распространяется на присоединительные фланцы трубопроводной арматуры (далее - арматуры), соединительных частей и трубопроводов, а также на присоединительные фланцымашин, оборудования, приборов, патрубков, аппаратов и резервуаров на номинальное давление до PN 250 и устанавливает конструкцию и размеры стальных и чугунных фланцев, определяет типы фланцев, типы форм уплотнительных поверхностей, устанавливает технические требования к изготовлению, маркировке, испытаниям и контролю. В настоящем стандарте приведены рекомендации по выбору материала для фланцев и крепежных деталей фланцевых соединений а также по выбору уплотнительной поверхности в зависимости от опасности и параметров рабочей среды. На фланцы для других объектов, параметров и условий применения действуют ГОСТ 1536, ГОСТ 4433, ГОСТ 9399, ГОСТ 25660, ГОСТ 28759.1-ГОСТ 28759.5, [1]
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 106
Approved: Federal Agency for Technical Regulation and Metrology,
5/26/2015
SKU: RUSS139000
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Admission Testing »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Main materials »
Steel, cast iron »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.1 Flanges »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.2 Weld connection »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.1 Flange connection »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
As a Replacement Of:
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 1215-79: Malleable iron castings
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-96: Cargo marking
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2.301-68: Unified system for design documentation. Formats
GOST 20072-74: Heat-resistant steel
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25660-83: Underwater pipeline sealing flanges 10,0 MPa (100 kgf/sq sm). Design
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2591-2006: Square hot-rolled steel bars. Dimensions
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28759.2-90: Steel flat welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.3-90: Steel butt welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.4-90: Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4433-76: Flanges of valves connecting pieces and pipelines for shipping systems. Types
GOST 4543-71: Structural alloyed steel
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5773-90: Book and magazine editions. Sizes
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 977-88: Steel castings. General specifications
GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions
GOST R 52376-2005: Heat-resistant spiral-wound gaskets. Types. Main dimensions
GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
GOST R 52591-2006: Digital television format user's data broadcasting system. Basic parameters
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
The Document is Referenced By:
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements
GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications
GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications
GOST 34294-2017: Cryogenic pipeline valves. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions
GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications
GOST 34569-2019: The main pipeline transport of oil and oil products. Devices for discharge of bulk oil and petroleum products. General specifications
GOST 34608-2019: Safety and control devices for gas burners and gas-burning appliances. Automatic shut-off valves for operating pressures above 500 to 6300 kPa inclusive
GOST 34670-2020: Gas distribution systems. Gas reduction points. Basic Provisions
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements
GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements
GOST R 53326-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications
GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications
GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications
GOST R 58621-2019: The main pipeline transport of oil and oil products. Hose of a high pressure. General specifications
PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications
ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.