imgalt

GOST 33344-2015

ГОСТ 33344-2015

Constructive pultruded profiles from polymer composites. General specifications

Профили пултрузионные конструкционные из полимерных композитов. Общие технические условия

Status: Effective - Introduced for the first time. IUS 4-2016

This standard applies to pultruded profiles of polymer composites of structural designation (hereinafter - pultrusion profiles)

Настоящий стандарт распространяется на пултрузионные профили из полимерных композитов конструкционного назначения (далее - пултрузионные профили)

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 10/7/2015

SKU: RUSS139081

Price: $590.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.2 Plastic Products »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »


The Document References:

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 10354-82: Polyethylene film Specifications

GOST 12.1.004-76: Occupational safety standards system. Fire safety. General requirements

GOST 12.1.004-85: Occupational safety standards system. Fire safety. General requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.4.004-74: Filtering protective mask RPG-67

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.028-76: Respirators шб-1 "lepestok"

GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 12303-80: Boxes made from cardboard, paper

GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 14192-96: Cargo marking

GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 166-89: Vernier callipers. Specifications

GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution

GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection

GOST 17308-88: Twines. Specifications

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 2.304-81: Unified system for design documentation. Letters for drawings

GOST 20010-93: Industrial rubber gloves

GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications

GOST 21140-88: Containers

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 28950-91: Drawing instruments. General technical requirements and test methods

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30402-96: Building materials Ignitability Test Meth

GOST 32618.2-2014: Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature

GOST 32652-2014: Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods

GOST 32656-2014: Polymer composites. Test methods. Tensile test methods

GOST 32659-2014: Polymer composites. Test methods. Determination of apparent interlaminar shear strength by short-beam method

GOST 32794-2014: Polymer composites. Terms and definitions

GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements

GOST 33371-2015: Polymer composites. Production of plates by pultrusion moulding for preparation of test specimens

GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4650-2014: Plastics. Methods for the determination of water absorption

GOST 6507-90: Micrometers. Specifications

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

The Document is Referenced By:

GOST 31937-2024: Buildings and structures. Rules for inspection and monitoring of technical condition

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST R 57942-2017: Polymer composite sheet piles. General technical requirements and test methods

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!