imgalt

GOST 33345-2015

ГОСТ 33345-2015

Polymer composites. Production of plates for preparation of test specimens. General technical requirements

Композиты полимерные. Производство пластин для изготовления образцов для испытаний. Общие технические требования

Status: Effective - Introduced for the first time. IUS 3-2016

The standard applies to polymer composites and establishes general technical requirements for the production of plates used to make test specimens.

Стандарт распространяется на полимерные композиты и устанавливает общие технические требования к производству пластин, используемых для изготовления образцов для испытаний

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 8/13/2015

SKU: RUSS139082

Price: $510.00



imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.2 Polymer and composite materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.1 Products of main chemical industries »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.1 Basic requirements for testing laboratories and their activities »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »


The Document References:

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.4.004-74: Filtering protective mask RPG-67

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.028-76: Respirators шб-1 "lepestok"

GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 166-89: Vernier callipers. Specifications

GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution

GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection

GOST 20010-93: Industrial rubber gloves

GOST 32652-2014: Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods

GOST 32794-2014: Polymer composites. Terms and definitions

GOST 33346-2015: Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens

GOST 33347-2015: Polymer composites. Production of plates by pressing for preparation of test specimens

GOST 33348-2015: Polymer composites. Production of plates from prepregs for preparation of test specimens

GOST 33349-2015: Polymer composites. Production of plates by winding for preparation of test specimens

GOST 33350-2015: Polymer composites. Production of plates by transfer moulding for preparation of test specimens

GOST 33351-2015: Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds

GOST 33367-2015: Polymer composites. Production of plates by compression moulding of prepregs and premixes for preparation of test specimens

GOST 33371-2015: Polymer composites. Production of plates by pultrusion moulding for preparation of test specimens

GOST 33372-2015: Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 6507-90: Micrometers. Specifications

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

The Document is Referenced By:

GOST 32656-2017: Polymer composites. Test methods. Tensile tests

GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications

GOST 33346-2015: Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens

GOST 33347-2015: Polymer composites. Production of plates by pressing for preparation of test specimens

GOST 33348-2015: Polymer composites. Production of plates from prepregs for preparation of test specimens

GOST 33349-2015: Polymer composites. Production of plates by winding for preparation of test specimens

GOST 33350-2015: Polymer composites. Production of plates by transfer moulding for preparation of test specimens

GOST 33351-2015: Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds

GOST 33367-2015: Polymer composites. Production of plates by compression moulding of prepregs and premixes for preparation of test specimens

GOST 33371-2015: Polymer composites. Production of plates by pultrusion moulding for preparation of test specimens

GOST 33372-2015: Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens

GOST 33843-2016: Polymer composites. Method for determining the shear modulus in the plane by the torsion method

GOST 34163.1-2017: Plastics Determination of the behavior of rigid plastics during breakdown under the influence of impact. Part 1. Non-instrumental method

GOST 34250-2017: Plastics Method for determining the strength under impact tension

GOST 34261-2017: Fiberglass. Roving Production of test samples and determination of tensile strength of impregnated rovings

GOST 34367.2-2017: Polymer composites. Collection and presentation of comparable numerical data on the properties of composites reinforced with continuous fibers

GOST R 56801-2015: Plastics. Determination of dynamic mechanical properties. Part 1. General principles

GOST R 57747-2017: Woven fabrics. General technical requirements and test methods

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!