GOST 33368-2015
ГОСТ 33368-2015
|
|
Oil and oil products trunk pipeline transportation. Filters. General technical specifications
Магистральный трубопроводный транспорт нефти и нефтепродуктов. Фильтры. Общие технические условия
Status: Effective - Introduced for the first time. IUS 6-2016
This standard applies to filters placed at oil pumping stations of trunk oil pipelines and pipelines with a nominal diameter of up to DN 1200 at a nominal pressure of up to PN 10.0 MPa inclusive, designed to clean pumped oil and oil products from solid ob
Настоящий стандарт распространяется на фильтры, размещаемые на нефтеперекачивающих станциях магистральных нефтепроводов и нефтепродуктопроводов номинальным диаметром до DN 1200 на номинальное давление до PN 10,0 МПа включительно, предназначенные для очист
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/8/2015
SKU: RUSS139106
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
The Document References:
GOST 1012-2013: Aviation petrols. Specifications
GOST 10227-86: Jet fuels
GOST 10354-82: Polyethylene film Specifications
GOST 10433-75: Fuel oil for gas-turbine plants. Specifications
GOST 10585-2013: Petroleum fuel. Mazut. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.044-80: Occupational safety standards system. Machines and equipment for oil transportation. Safety requirements
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 14192-96: Cargo marking
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19281-2014: High strength rolled steel. General specification
GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation
GOST 2.103-68: Unified system for design documentation. Stages of designing
GOST 20799-88: Industrial oils Specifications
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 2787-75: Recycled ferrous metals
GOST 28338-89: Nominal bores (nominal sizes)
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 305-2013: Diesel fuel. Specifications
GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 4543-71: Structural alloyed steel
GOST 511-82: Fuel for engines. Motor method for determination of octane number
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 6533-78: Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 8226-82: Fuel for engines. Research method for determination of octane number
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 53672-2009: Pipeline valves. General safety requirements
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.