GOST 33369-2015
ГОСТ 33369-2015
|
|
Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications
Реактопласты, армированные волокном, для усиления и восстановления строительных конструкций. Общие технические условия
Status: Effective - Introduced for the first time. IUS 4-2016
The standard applies to fiber reinforced thermosets (hereinafter referred to as thermosets), which are part of the external reinforcement system made of polymer composites used to strengthen and restore various building structures, including columns, walls, beams and floor slabs, shells, and truss elements. The standard is recommended for use by enterprises and organizations in the development of external reinforcement systems from reactoplastics for strengthening and restoring reinforced concrete, concrete, brick, stone and reinforced stone building structures for various purposes.
Стандарт распространяется на реактопласты, армированные волокном (далее - реактопласты), являющиеся составной частью системы внешнего армирования из полимерных композитов, применяемой для усиления и восстановления различных строительных конструкций, в том числе колонн, стен, балок и плит перекрытий, оболочек, элементов ферм. Стандарт рекомендуется для использования предприятиями и организациями при разработке систем внешнего армирования из реактопластов для усиления и восстановления железобетонных, бетонных, кирпичных, каменных и армокаменных строительных конструкций различного назначения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/7/2015
SKU: RUSS139107
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
The Document References:
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 14192-96: Cargo marking
GOST 14759-69: Adhesives. Method of determination of shear strength
GOST 14760-69: Adhesives. Method of determination of tensile strength
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 2.304-81: Unified system for design documentation. Letters for drawings
GOST 20010-93: Industrial rubber gloves
GOST 21140-88: Containers
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 26454-85: Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond
GOST 26589-94: Roofing and waterproof mastics. Methods of testing
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30402-96: Building materials Ignitability Test Meth
GOST 32618.2-2014: Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
GOST 32667-2014: Carbon fibre. Determination filament’s tensile properties
GOST 32794-2014: Polymer composites. Terms and definitions
GOST 4650-2014: Plastics. Methods for the determination of water absorption
GOST 6943.5-79: Glass textile products. Method of filament rupture stress determination
GOST 8828-89: Base paper and two-layer waterproof packaging paper
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.