GOST 7370-2015

ГОСТ 7370-2015

Railway frogs. Specifications

Крестовины железнодорожные. Технические условия

Status: Effective - Supersedes. IUS 4-2016

This standard applies to crosspieces of types P75, P65 and P50 with fixed elements for switches, congresses and deaf intersections of a 1520 mm wide gauge railway track for general and non-public

Настоящий стандарт распространяется на крестовины типов Р75, Р65 и Р50 с неподвижными элементами для стрелочных переводов, съездов и глухих пересечений железнодорожного пути широкой колеи 1520 мм общего и необщего пользования

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 66

Approved: Federal Agency for Technical Regulation and Metrology, 9/29/2015

SKU: RUSS139390

Price: $832.26




The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.3 Railway and tram locomotives, rail rolling stock »

ISO classifier » 45 RAILWAY ENGINEERING » 45.080 Rails and railway components »

National standards » 45 RAILWAY ENGINEERING » 45.080 Rails and railway components »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V4 Products from ferrous metals for railway transport » V42 Rails. Overlays. Lining. Crutches »


As a Replacement Of:

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10877-76: Preservative oil K-17

GOST 10-88: Inside micrometers. Specifications

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 164-90: Vernier height gauges. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18353-79: Non-destructive check. Classification of types and methods

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19537-83: Gun grease. Specifications

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23479-79: Non-destructive testing. Optic methods. General requirements

GOST 23829-85: Acoustical non-destructive testing. Terms and definitions

GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications

GOST 24522-80: Capillary non-destructive inspection. Terms and definitions

GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits

GOST 25706-83: Magnifiers

GOST 26266-90: Ultrasonic transducers

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28370-89: Railbound frogs of 1/11 and 1/9 marks. Basic dimensions

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 30242-97: Imperfections in metallic fusion welds. Classification, designation and definitions

GOST 3749-77: Checking 90° squares. Specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 4133-73: Fishplates for wide gauge railway track

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 610-72: Oils for axle journals. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8.062-85: State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring means of hardness on Brinell scale

GOST 8.063-2012: State system for ensuring the uniformity of measurements. State verification schedule for means measuring of metals and alloys on Vickers scales hardness

GOST 8.064-94: State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness on Rockwell and Super-Rockwell scales

GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification

GOST 8026-92: Levelling rules. Specifications

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 8925-68: Flat clearance gauges for machine retaining devices. Design

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9031-75: Reference hardness standards

GOST 9038-90: Gauge blocks. Specifications

GOST 9378-93: Roughness comparison specimens

GOST 9450-76: Measurements microhardness by diamond instruments indentation

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9569-2006: Paraffined paper. Specifications

GOST ISO 9001-2011: Quality management systems. Requirements

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 51685-2013: Railway rails. General specifications.

GOST R 53441-2009: Basic norms of interchangeability. Geometrical product specifications. Standard angles and slopes on prisms

GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 55443-2013: Railway track. Nomenclature of dependability and functional safety indices

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R 8.695-2009: State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 2. Verification and calibration of testing machines

GOST R ISO 6507-1-2007: Metals and alloys. Vickers hardness test. Part 1. Test method

GOST R ISO 6520-1-2012: Welding and allied process. Classification of geometric imperfections in metallic materials. Part 1. Fusion welding

GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread

GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

MI 244-82: State system for ensuring uniformity of measurements. Methodical instructions. PMT-3 microhardness tester. Method of verification

PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.

PB 03-440-02: Attestation rules for nondestructive inspection personnel

PR 32.113-98: Rules of certification of personnel for non-destructive control of technical objects of railway transport

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 977-88: Steel castings. General specifications

The Document is Referenced By:

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!