GOST 9544-2015

ГОСТ 9544-2015

Pipeline valves. Leakage rates of valves

Арматура трубопроводная. Нормы герметичности затворов

Status: Effective - Introduced for the first time. IUS 2-2016

This standard establishes the norms and classes of tightness of valves of pipe fittings of nominal diameters from DN 3 to DN 2400 for nominal pressure up to PN 420 of all types (stop, return, safety, regulating, distribution and mixing, phase separation) and all types (valves, valves and butterfly valves), as well as for combined reinforcement. The norms of tightness, given in the standard, are used for all types of tests, as well as for checking the tightness of the valve during operation

Настоящий стандарт устанавливает нормы и классы герметичности затворов трубопроводной арматуры номинальных диаметров от DN 3 до DN 2400 на номинальные давления до PN 420 всех видов (запорная, обратная, предохранительная, регулирующая, распределительно-смесительная, фазоразделительная) и всех типов (задвижки, клапаны, краны и дисковые затворы), а также для комбинированной арматуры. Нормы герметичности, приведённые в стандарте, применяют при всех видах испытаний, а также при проверках герметичности затвора арматуры в процессе эксплуатации

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 55

Approved: Federal Agency for Technical Regulation and Metrology, 5/26/2015

SKU: RUSS139428

Price: $173.25




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 10. Production » 10.1 General manufacturing issues »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.7 Shutter assemblies »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests »

Standards for pipe fittings (TPA) » 7. Piping valves (TPA) from non-metallic materials (plastics, thermoplastics, glass, etc.) »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.6 Steam traps and other separation valves »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.5 Distribution and mixing fittings »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.4 Safety valves »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.3 Reverse fittings »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.2 Control valves »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.1 Stop valves »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »


The Document References:

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 24856-2014: Pipeline valves. Terms and definitions

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes

MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 31187-2011: Main-line diesel locomotives. General technical requirements.

GOST 31845-2012: Gas fuel locomotives. Explosion safety requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications

GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications

GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications

GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications

GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34350-2017: Fire-fighting techniques. Fire extinguishing trucks. General technical requirements. Test methods

GOST 34396-2018: Oil and oil products custody transfer metering systems. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements

GOST R 57026-2016: Liquefied natural gas fueled locomotives. Methods of test for leaks pipes, fittings and joints gas treatment systems

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements

PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications

SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device

SP 36.13330.2012: Trunk pipelines

SP 373.1325800.2018: Independent heat supply sources. Design rules

ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements

ST TsKBA 031-2015: Pipeline valves and actuators for it. Passport. Development and design rules

ST TsKBA 038-2007: Valves pipeline shut-off. Change the degree of tightness of valves depending on the operating conditions and in the process of development

ST TsKBA 082-2009: Pipe fittings. Input control

STB 2511-2017: The system of fire safety standards. Fire trucks main. General technical requirements. Test methods

STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

GOST 34563-2019: The main pipeline transport of oil and oil products. Rules for technological design

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34612-2019: Pipe fittings. Passport. Rules for development and design

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines

MU 1.2.3.07.0057-2018: Composition and scope of testing of special valves and actuators for nuclear power plants. Guidelines

SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Steering gears. Industrial purity requirements.
Language: English
Price: $1,375.40
Pipeline valves. Leakage rates of valves.
Language: English
Price: $198.99
Pipeline valves. Swing and lift check valves. General specifications
Language: English
Price: $202.95
Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
Language: English
Price: $57.42
Heat-resistant spiral-wound gaskets. Types. Main dimensions
Language: English
Price: $79.20
Slinging arrangements for vessels and apparatus. Specifications
Language: English
Price: $217.80
Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
Language: English
Price: $180.08
Rolling bearings. Static load rating
Language: English
Price: $237.60
Medical instruments, apparatus and equipment. General specifications
Language: English
Price: $286.95
Electromagnetic compatibility of technical equipment. Immunity tests. General introduction
Language: English
Price: $435.60
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29
Rolling bearings. Dynamic load ratings and rating life
Language: English
Price: $358.48
Safety manual “recommendations for the design and safe operation of the process pipelines”
Language: English
Price: $644.67
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $175.23
Mineral fertilizers. Method for determination of granules static strength
Language: English
Price: $69.84
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55
Safety of machinery. Requirements for justification of safety
Language: English
Price: $167.46
Mineral fertilizers. Method for determination of grain-size analysis
Language: English
Price: $25.74

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!