GOST R 51045-2014
ГОСТ Р 51045-2014
|
|
Rails of ways technological railways transport. General specifications
Рельсы для путей промышленного железнодорожного транспорта. Общие технические условия
Status: Effective - Supersedes. IUS 6-2015
This standard applies to 1520 and 1524 mm wide gauge railway rails (hereinafter referred to as rails) intended for operation on access and technological routes of non-public use of industrial railway transport, as well as for making turnouts
Настоящий стандарт распространяется на железнодорожные рельсы широкой колеи 1520 и 1524 мм (далее - рельсы), предназначенные для эксплуатации на подъездных и технологических путях необщего пользования железнодорожного промышленного транспорта, а также для
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/26/2014
SKU: RUSS139887
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
45 Railway technology »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
National standards »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
As a Replacement Of:
GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 3749-77: Checking 90° squares. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8233-56: Steel. Microstructure standards
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 50542-93: Ferrous metals products for the permanent way tracks. Terms and definitions
GOST R 51685-2013: Railway rails. General specifications.
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 14284-2009: Steel and iron. Sampling and preparation of samples for determination of chemical composition
SP 37.13330.2012: Industrial transport
The Document is Referenced By:
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57181-2016: Thermite welding of rails. Technological process
GOST R 57899-2017: Anchors and strains for formworks. General specifications
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 37.13330.2012: Industrial transport
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.