GOST R 54560-2015
ГОСТ Р 54560-2015
|
|
Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
Трубы и детали трубопроводов из реактопластов, армированных стекловолокном, для водоснабжения, водоотведения, дренажа и канализации. Технические условия
Status: Effective - Supersedes. IUS 6-2016
This standard applies to pipes and pipeline parts made of thermo-reinforced plastics reinforced with glass fiber (hereinafter referred to as pipes and fittings), with a nominal diameter of 300 to 3000, operated at an operating pressure of up to 3.2 MPa an
Настоящий стандарт распространяется на трубы и детали трубопроводов из реактопластов, армированных стекловолокном (далее-трубы и фитинге), номинальным диаметром от 300 до 3000, эксплуатируемые при рабочем давлении до 3,2 МПа и при температуре рабочей сред
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/27/2015
SKU: RUSS139926
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
As a Replacement Of:
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
The Document References:
Decision 299: Uniform sanitary and epidemiological and hygienic requirements for products (goods) subject to sanitary and epidemiological supervision (control)
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 14192-96: Cargo marking
GOST 166-89: Vernier callipers. Specifications
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 17139-2000: Textile glass. Roving. Specifications
GOST 20010-93: Industrial rubber gloves
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25.603-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8325-93: Textile glass. Twisted complex threads. Specifications
GOST 9378-93: Roughness comparison specimens
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 51474-99: Packaging. Pictorial marking for handling of goods
GOST R 51641-2000: Filtering granular materials. General specifications
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
GOST R 54924-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of longitudinal tensile properties
GOST R 54925-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of the apparent initial circumferential tensile strength
GOST R 54926-2012: Fiberglass reinforced thermosetting plastic pipes and part of pipelines. Method for determination of prove the resistance to initial ring deflection
GOST R 55069-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Test methods. Test cemented and wrapped joints
GOST R 55070-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods to prove the leak tightness under short-term internal pressure
GOST R 55071-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of initial specific ring stiffness
GOST R 55875-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints
GOST R 55876-2013: Glass-reinforced thermosetting plastics pipes and fittings. Test methods for leak tightness of flexible joints
GOST R 56761-2015: Polymer composites. Method for determination of Barcol hardness
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
MU 2.1.4.783-99: Potable water and water supply of the populated territories. Hygienic estimation of materials, reagents, equipment, and technologies used in water service facilities Methodical instructions
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SP 40-104-2001: Design and installation of underground pipelines of water supply with fibreglass pipes. Amendments, published in the BST 2002, №1 № 4, № 5, 2005.
SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST R 55077-2012: Fiberglass reinforced thermosetting plastic pipes and part of pipelines. Methods for determination of the resistance to chemical attack for the inside of a section in a deflected condition
GOST R 57570-2017: Fiberglass reinforced thermosetting plastic pipes. Determination of beam deflection under full bore flow
GOST R 57602-2017: Fibre reinforced thermosetting plastic pipes and pipelines. Nondestructive testing methods with exploiting
GOST R 57776-2017: Fibre reinforced thermosetting plastic pipes. Nondestructive testing method with manufacturing
GOST R 57949-2017: Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Methods for regression analysis
GOST R 58875-2020: Green standards. Greened and maintained roofs of buildings and structures. Technical and environmental requirements
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 129.13330.2019: External networks and water supply and sewerage facilities
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.