GOST R 54864-2016
ГОСТ Р 54864-2016
|
|
Hot-deformed seamless steel pipes for the welded steel structures. Specifications
Трубы стальные бесшовные горячедеформированные для сварных стальных строительных конструкций. Технические условия
Status: Effective - Supersedes. IUS 7-2016
This standard applies to hot-deformed steel pipes for welded steel building structures according to GOST 23118, used in non-corrosive environments of high and normal levels of responsibility according to GOST 27751
Настоящий стандарт распространяется на трубы стальные бесшовные горячедеформированные для сварных стальных строительных конструкций по ГОСТ 23118, эксплуатируемых в неагрессивных средах высокого и нормального уровня ответственности по ГОСТ 27751
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/24/2016
SKU: RUSS139932
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
As a Replacement Of:
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
The Document References:
GOST 10006-80: Metal pipes
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17502-72: Generators of the quantum optical range of a pulsed regime on inert gases and metal vapors. The main parameters
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 2216-84: Adjustable smooth snap gauges
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 27268-87: Weaving machines. Determination of sides
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28548-90: Steel tubes. Terms and definitions
GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
GOST 31458-2015: Steel and cast iron pipes and fittings. Inspection documents
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 3728-78: Tubes. Method of bend-over test
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7502-55: Measuring metal tapes
GOST 7502-61: Measuring metal tapes
GOST 7502-69: Measuring metal tapes
GOST 7502-80: Measuring metal tapes. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8026-92: Levelling rules. Specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 55942-2014: Steel tubes. Preparation of ends of tubes and fittings for welding. General technical requirements
GOST R ISO 10893-10-2014: Seamless and welded steel tubes. Part 10. Automated full peripheral ultrasonic testing for the detection of longitudinal and/or transverse imperfections
GOST R ISO 10893-3-2016: Seamless and welded steel tubes. Part 3. Automated full peripheral flux leakage testing of ferromagnetic tubes for the detection of longitudinal and/or transverse imperfections
GOST R ISO 10893-5-2016: Seamless and welded steel tubes. Part 5. Magnetic particle inspection of ferromagnetic tubes for the detection of surface imperfections
GOST R ISO 10893-8-2014: Seamless and welded steel tubes. Part 8. Automated ultrasonic testing for the detection of imperfections
The Document is Referenced By:
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 294.1325800.2017: The construction of steel. Design rules
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.