GOST R 56378-2015
ГОСТ Р 56378-2015
|
|
Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
Материалы и системы для защиты и ремонта бетонных конструкций. Требования к ремонтным смесям и адгезионным соединениям контактной зоны при восстановлении конструкций
Status: Effective - Introduced for the first time. IUS 9-2015
This standard establishes requirements for repair mixtures on cement, polymer-modified cement-polymer and polymer binders, as well as their adhesive compounds (structural and
Настоящий стандарт устанавливает требования к ремонтным смесям на цементных, модифицированных полимером цементно-полимерных и полимерных вяжущих, а также к их адгезионным соединениям (конструкционным и/или неконструкционным) в контактной зоне с бетоном во
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/3/2015
SKU: RUSS140119
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
The Document References:
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10994-74: Precision alloys. Grades.
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 12497-78: Plastics. The method of epoxy group determination
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing
GOST 166-89: Vernier callipers. Specifications
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 19286-77: Concentrated kaolin. Determination of size distribution
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27271-2014: Paint and varnish materials. The method of determining the viability of multi-component systems
GOST 29127-91: Plastics. Thermogravimetry of polymers. Temperature scanning method
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31189-2003: Dry building mixes. Classification
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32618.2-2014: Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 5802-86: Mortars. Test methods.
GOST 6709-72: Distilled water. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
GOST 9.716-91: Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST R 52487-2010: Paint materials. Determination of non-volatile-matter mass fraction
GOST R 53653-2009: Paint materials. Method for determination of the pot life of multicomponent systems
The Document is Referenced By:
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 70222-2022: Heavy concretes. Technical conditions
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.