GOST R 56403-2015
ГОСТ Р 56403-2015
|
|
Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
Магистральный трубопроводный транспорт нефти и нефтепродуктов. Трубы стальные сварные. Технические условия
Status: Effective - Introduced for the first time. IUS 12-2015
This standard applies to longitudinal welded steel pipes with outer diameter from 114 to 1220 mm, intended for construction, repair and reconstruction of trunk pipelines and oil pipelines transporting non-corrosive oil and oil products at operating pressu
Настоящий стандарт распространяется на трубы стальные сварные прямошовные наружным диаметром от 114 до 1220 мм, предназначенные для строительства, ремонта и реконструкции магистральных нефтепроводов и нефтепродуктопроводов, транспортирующих некоррозионноа
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/15/2015
SKU: RUSS140144
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Fluxes »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.75 Steel pipes and tubes for special purposes »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.75 Steel pipes and tubes for special purposes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
The Document References:
GOST 10006-80: Metal pipes
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 1497-84: Metals. Methods of tension test
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
GOST 30456-97: Metal production. Rolled steel and tubes. Methods of blow bending tests
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 6507-90: Micrometers. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8026-92: Levelling rules. Specifications
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 54795-2011: Non-destructive testing. Qualification and certification of personnel. General principles
GOST R ISO 10543-99: Seamless and hot-stretch-reduced welded steel tubes for pressure purposes. Ultrasonic thickness testing
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST R ISO 4967-2009: Steel. Determination of content of non-metallic inclusions. Micrographic method using standard diagrams
The Document is Referenced By:
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 9.404-2022: Unified system of protection against corrosion and aging (USPCS). Protective organic coatings. Coating systems based on polyethylene powder compositions. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.