GOST R 56707-2015
ГОСТ Р 56707-2015
|
|
Facade’s thermo insulation composite systems with external mortar layers. General specifications
Системы фасадные теплоизоляционные композиционные с наружными штукатурными слоями. Общие технические условия
Status: Effective - Introduced for the first time. IUS 5-2016
The standard applies to composite facade insulation systems with external plaster layers (hereinafter referred to as SFTC), which are used for insulating enclosing wall structures of buildings and structures from the outside for new construction, reconstruction and major repairs. The standard establishes SFTC reliability classes for use in the construction, reconstruction and overhaul of buildings and structures of various levels of responsibility, technical requirements for SFTC and SFTK system materials, as well as the procedure for carrying out the procedure for confirming SFTK compliance. The standard can be applied for certification of SFTC.
Стандарт распространяется на системы фасадные теплоизоляционные композиционные с наружными штукатурными слоями (далее - СФТК), применяемые при утеплении ограждающих стеновых конструкций зданий и сооружений с наружной стороны при новом строительстве, реконструкции и капитальном ремонте. Стандарт устанавливает классы надежности СФТК по применению при строительстве, реконструкции и капитальном ремонте зданий и сооружений различных уровней ответственности, технические требования к СФТК и системным материалам СФТК, а также порядок проведения процедуры подтверждения соответствия СФТК. Стандарт может быть применен для сертификации СФТК.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/13/2015
SKU: RUSS140454
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
The Document is Replaced With:
GOST R 56707-2023: Facade thermal insulation composite systems with external plaster layers. General technical conditions
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 31251-2008: Facades of buildings. Fire hazard test method
GOST 31913-2011: Thermal insulating materials and products. Terms and definitions
GOST 32310-2012: Factory made termal insulation products of extruded polystyrene foam (XPS) for building. Specifications
GOST 32314-2012: Factory made mineral wool products used for thermal insulation of buildings. General specifications
GOST 33739-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST EN 12087-2011: Thermal insulating products in building applications. Methods for determination of long term water absorption by immersion
GOST EN 1607-2011: Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST EN 1609-2011: Thermal insulating products for building applications. Methods for determination of short term water absorption by partial immersion
GOST EN 822-2011: Thermal insulating products for building applications. Methods for determination of length and width
GOST EN 823-2011: Thermal insulating products for building applications. Method for determination of thickness
GOST EN 824-2011: Thermal insulating products for building applications. Method for determination of deviation from squareness
GOST EN 825-2011: Thermal insulating products for building applications. Methods for determination urement of deviation from flatness
GOST EN 826-2011: Thermal insulating products for building applications. Methods for determination of compression behaviour
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 55225-2012: Meshes of glass fibre for building-faces, reinforcing, alkali-resistant. Specifications
GOST R 55412-2013: Faсade’s thermo insulation composite systems with external mortar’s lays. Test methods
GOST R 55818-2013: Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications
GOST R 55936-2014: Polymer-cement base adhesives, base coats and patching putties for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 55943-2014: Facade’s thermo insulation composite systems with external mortar’s lays. Method for the determination and classifying of the resistance to the exposure to adverse weather conditions
SP 131.13330.2012: Building climatology
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
The Document is Referenced By:
GOST R 58359-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Technical specifications
GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods
GOST R 58388-2019: Composite facade systems with exterior plaster layers. Conformity assessment
GOST R 58893-2020: Polyurethane-based adhesive compositions for fixing the thermal insulation layer in facade thermal insulation composite systems with external plaster layers. Specifications
GOST R 58937-2020: A decorative and protective finishing layer made of piece materials for facade thermal insulation composite systems with external plaster layers. Specifications
GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications
GOST R 70309-2022: Grouting compositions for the finishing decorative and protective layer of piece materials for facade thermal insulation composite systems with external plaster layers. Technical conditions
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
