GOST R 56712-2015
ГОСТ Р 56712-2015
|
|
Panel multilayer polycarbonate. Specifications
Панели многослойные из поликарбоната. Технические условия
Status: Effective - Introduced for the first time. IUS 5-2016
This standard applies to process evaluation and its application to improve and define process capabilities. This standard establishes a minimum set of assessment requirements, compliance with which will ensure objectivity, impartiality, consistency, repea
Настоящий стандарт распространяется на панели многослойные из поликарбоната плоские, светопропускающие (далее - панели и ПСП) неокрашенные (бесцветные) и окрашенные, с защитой от ультрафиолетового облучения (УФО) и без защиты, изготовляемые способом экстр
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/13/2015
SKU: RUSS140459
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.01 Rubber and plastic products in general »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.01 Rubber and plastic products in general »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 10354-82: Polyethylene film Specifications
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 15088-2014: Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 19109-84: Plastics. Method for the determination of Izod impact strength.
GOST 19433-88: Dangerous goods. Classification and marking
GOST 20477-86: Polyethylene tape with adhesive layer. Specifications
GOST 21981-76: Sealants. Determination method of bond strength with metal at peeling
GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST 25706-83: Magnifiers
GOST 26302-93: Glass. Methods of determination of light regular transmittance and light regular reflection
GOST 28966.2-91: Polymer adhesives. Method of determining peel strength
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30402-96: Building materials Ignitability Test Meth
GOST 30444-97: Building materials. Spread flame test method
GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications
GOST 32278-2013: Glass and glass products. Optical characteristics determination methods. Determination of colour coordinates
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4648-2014: Plastics. Method of static bending test
GOST 4650-2014: Plastics. Methods for the determination of water absorption
GOST 4651-2014: Plastics. Compression test method
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST R 51032-97: Building materials spread flame test method
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 54165-2010: Glass and glass products. Thermal properties determination methods. Thermal resistance determination method
GOST R 54169-2010: Tinted flat glass. General specifications
GOST R ISO 10140-2-2012: Acoustics. Laboratory measurement of sound insulation of building elements. Part 2. Measurement of airborne sound insulation
SanPiN 2.1.2.729-99: Polymer and polymer containing construction. Materials. Products and structures. Hygienic requirements
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing
The Document is Referenced By:
GOST R 58756-2019: Polymer multilayer domes. Technical specifications
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 386.1325800.2018: Light transparent polycarbonate structures. Design rules
SP 507.1325800.2021: Buildings and premises of weapons, ammunition and special means for the needs of the penal system. Design Rules
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.