GOST R 56830-2015
ГОСТ Р 56830-2015
|
|
Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements
Нефтяная и газовая промышленность. Установки скважинных электроприводных лопастных насосов. Общие технические требования
Status: Effective - Introduced for the first time. IUS 6-2016
This standard establishes general rules and characteristics of electric-driven vane pump installations, their operating conditions, reliability assessment, designation, determination of operational and functional characteristics, energy efficiency indicat
Настоящий стандарт устанавливает общие правила и характеристики установок электроприводных лопастных насосов, условиям их эксплуатации, оценке надежности, обозначению, определению эксплуатационных и функциональных характеристик, показателям энергетической
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2015
SKU: RUSS140580
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 10446-80: Wire. Tensile test method
GOST 1139-80: Basic norms of interchangeability. Straight-sided splined joints. Dimensions and tolerances
GOST 11677-85: Power transformers
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12.0.003-2015: Occupational safety standard system. Dangerous and harmful production effects. Classification
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12.2.024-87: Noise. Power oil-immersed transformers.
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 13837-79: General purpose dynamometers
GOST 13846-89: Gush and injection well equipment. Standard schemes, basic parameters and technical requirements for construction
GOST 14192-96: Cargo marking
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv
GOST 15171-78: Additive АКОР-1. Specifications
GOST 16110-82: Power transformers. Terms and definitions
GOST 162-90: Depth gauges. Specifications
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 16962.2-90: Electrotechnical product
GOST 17398-72: Pumps. Terms and definitions
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18620-86: Electrotechnical articles
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 20.39.312-85: Integrated system of general technical requirements. Electrotechnical equipments and components. Dependability requirements
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20243-74: Power transformers. Methods of short-circuit tests
GOST 20799-88: Industrial oils Specifications
GOST 21023-75: Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21878-76: Random processes and dynamical systems. Terms and definitions
GOST 22483-2012: Conductors for cables, wires and cords
GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23207-78: Fatigue strength. Terms, definitions and symbols
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 24607-88: Semiconductor frequency converters
GOST 24683-81: Electrotechnical products. Methods of controlling resistance to attack by special media
GOST 2479-79: Rotating electrical machines. Symbols for types of construction and mounting arrangements.
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency
GOST 26118-84: Electric energy semiconductor converters with power 5 kV.A and higher. Marking, packing, transportation and storage
GOST 26567-85: Semiconductor energy converters. Test methods
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 27471-87: Electrical rotating machinery. Terms and definitions
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions
GOST 28996-91: Oil-field wellhead equipment. Terms and definitions
GOST 30296-95: General purpose equipment designed for determination of key parameters of vibration processes
GOST 30804.6.2-2013: Еlectromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods
GOST 30804.6.4-2013: Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in industrial environments. Limits and test methods
GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33758-2016: Pipes for use as casing or tubing and couplings for them. Basic parameters and inspection of thread connections. General technical requirements
GOST 3484.1-88: Power transformers. Electromagnetic test methods
GOST 3484.2-88: Power transformers. Heating tests
GOST 3484.3-88: Power transformers. Measuring methods of dielectric parameters of insulation
GOST 3484.4-88: Power transformers. Tank tests for strength
GOST 3484.5-88: Power transformers. Tank tests for leakages
GOST 5151-79: Wooden drums for electrical cables and wires. Specifications
GOST 6033-80: Basic norms of interchangeability. Involute splined joints with 30° profile angle. Dimensions, tolerances and measurable sizes
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 632-80: Casing pipes and couplings for them. Specifications
GOST 633-80: Oil well tubing and tubing couplings
GOST 6581-75: Liquid electrical insulating materials. Electric test methods
GOST 6827-76: Electrical equipment and receivers of electric energy. Series of nominal currents
GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods
GOST 859-2014: Copper. Grades
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9680-77: Power transformers from 0,01 kV x A and above. Series of power ratings
GOST IEC 60034-1-2014: Rotating electrical machines. Part 1. Nominal values of the parameters and operational performance
GOST IEC 60034-2A-2012: Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method
GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
GOST ISO 17769-1-2014: Fluid pumps and units. Basic terms, definitions, quantities, letter symbols and units. Part 1. Fluid pumps
GOST ISO 2954-2014: Mechanical vibration. Condition monitoring of machinery using measurements made on non-rotating parts. Requirements for instruments
GOST R 50779.22-2005: Statistical interpretation of test results. Estimation of the mean. Confidence interval
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 51777-2001: Cables for installations of submersible electric pumps. General specifications
GOST R 51906-2002: Thread connections for casing, tubing and pipe-lines and thread gauges for them. General technical requirements
GOST R 51906-2015: Thread connections for casing, tubing, line pipe and thread gauges for them. General technical requirements
GOST R 52719-2007: Power transformers. General specifications
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53365-2009: Pipes for use as casing or tubing and couplings for them. Basic parameters and inspection of thread connections. General technical requirements
GOST R 53366-2009: Steel pipes for use as casing or tubing for wells in petroleum and natural gas industries. General specifications
GOST R 56624-2015: Energy efficiency. Submersible bladed pumps and electric motors for oil production. Energy efficiency classes
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R IEC 60034-2-1-2009: Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
GOST R ISO 3746-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane
Norms 8-95: Industrial interference. Electrical devices operated outside residential buildings. Enterprises in selected areas or in separate buildings. Valid values. Test methods
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations
RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.
The Document is Referenced By:
GOST R 56624-2020: Energy efficiency. Downhole electric driven vane pumps and electric motors for oil production. Definition of indicators of energy efficiency
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.