GOST R 8.881-2015
ГОСТ Р 8.881-2015
|
|
State system for ensuring the uniformity of measurements. Moisture meters of wood and sawn timber. Verification procedure
Государственная система обеспечения единства измерений. Влагомеры древесины и пиломатериалов. Методика поверки
Status: Effective - Supersedes. IUS 12-2015
This standard applies to moisture meters of wood, sawn timber, sawn products according to GOST 18288, based on dielectric and conductometric methods, and establishes the methodology for their primary and periodic calibrations. The recommended calibration
Настоящий стандарт распространяется на влагомеры древесины, пиломатериалов, пилопродукции по ГОСТ 18288, основанных на диэлькометрическом и кондуктометрическом методах, и устанавливает методику их первичной и периодической поверок. Рекомендуемый интервал
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/27/2015
SKU: RUSS140666
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.3 Verification, calibration and testing of measuring instruments »
2.3.5 Measurements of physico-chemical composition and properties of substances »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
As a Replacement Of:
R 50.2.059-2008: State system for ensuring uniformity of measurements. Hydrometers lumber. Method of verification
The Document References:
GOST 18288-87: Manufacture of sawn timber. Terms and definitions
GOST 23706-93: Direct action analog electrical
GOST R 8.681-2009: State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST R 8.764-2011: State system for ensuring the uniformity of measurements. State and verification schedule for means of measuring electrical resistance
OK 005-93: All-Russia Classification of Products (Part 1)
OK 005-93: All-Russia Product Classification (OKP) (Part 13)
OK 005-93: All-Russia Classification of Products (OKP)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Product Classification (OKP) (Part 3)
OK 005-93: All-Russia Classification of Products (OKP) (Part 4)
OK 005-93: All-Russia Classification of Products (Part 5)
OK 005-93: All-Russia Classification of Products (Part 6)
OK 005-93: All-Russia Product Classification (OKP) (Part 7)
OK 005-93: All-Russia Classification of Products (OKP) (Part 8)
OK 005-93: All-Russia Classification of Products (part 9)
OK 005-93: All-Russia Classification of Products (OKP) (Part 10)
OK 005-93: All-Russia Classification of Products (Part 11)
OK 005-93: All-Russia Classification of Products (part 12)
OK 005-93: All-Russia Classification of Products (OKP) (Part 14)
OK 005-93: All-Russia Classification of Products (part 15)
OK 005-93: All-Russia Classification of Products (Part 16)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 19)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 21)
OK 005-93: All-Russia Classification of Products (OKP) (Part 22)
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.007-2001: State system for ensuring the uniformity of measurements. Verification marks
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.