GOST R 8.903-2015
ГОСТ Р 8.903-2015
|
|
State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
Государственная система обеспечения единства измерений. Масса нефти и нефтепродуктов. Методики (методы) измерений
Status: Effective - Introduced for the first time. IUS 5-2016
This standard applies to methods (methods) of gross and net mass measurements of oil and oil products and sets the procedure for their implementation
Настоящий стандарт распространяется на методики (методы) измерений массы брутто и нетто нефти и массы нефтепродуктов и устанавливает порядок их выполнения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/25/2015
SKU: RUSS140688
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
II Measurements »
2 Measurement of mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 13196-93: Means of level measuring and sampling of oil and oil products
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 21534-76: Petroleum The determination of chloride salts content
GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content
GOST 2517-2012: Petroleum and petroleum products. Methods of sampling
GOST 28498-90: Liquid-in-glass thermometers
GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements
GOST 31378-2009: Oil. General specifications.
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods
GOST 8.600-2011: State system for ensuring the uniformity of measurement. Fuel tanks for liquid oil products. Checking methods.
GOST R 51069-97: Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
GOST R 51858-2002: Crude petroleum. General specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52340-2005: Crude oil. Determination of vapour pressure with expansion method
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 54500.1-2011: Uncertainty of measurement. Part 1. Introduction to guides on uncertainty in measurement
GOST R 54500.3.1-2011: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
GOST R 54500.3-2011: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.580-2001: State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
MI 1953-2011: Recommendation. State system for ensuring uniformity of measurements. The mass of goods in bulk transport. Measurement technique with weights and weighers
MI 2083-90: Indirect measurements. Determination of the measurement results and the estimation of their errors
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
R 50.2.038-2004: State system for ensuring the uniformity of measurements. Direct single measurements. Estimation of errors and uncertainty of measurements result
R 50.2.075-2010: State System for ensuring the uniformity of measurements. Crude Petroleum and Petroleum Products. Laboratory Methods for Determination of Density, Relative Density and API Gravity
R 50.2.076-2010: State system for ensuring the uniformity of measurements. Density of petroleum and petroleum products. Methods of calculation. Programme and tables of calculation
RMG 51-2002: State system for ensuring the uniformity of measurements. Documentats for verification methods of measuring instruments. Basic statements
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.