imgalt

VSN 126-90

ВСН 126-90

Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards

Крепление выработок набрызг-бетоном и анкерами при строительстве транспортных тоннелей и метрополитенов. Нормы проектирования и производства работ

Status: Effective

The norms contain: necessary instructions for selecting the type of temporary and permanent structures of concrete lining and anchors, as well as combined structures; estimated positions to determine their parameters; requirements for materials of construction, technology and organization of work on their construction, including methods of quality control and assessment of the status of fixed workings.

Нормы содержат: необходимые указания для выбора вида временных и постоянных конструкций крепи из набрызгбетона и анкеров, а также комбинированных конструкций; расчетные положения для определения их параметров; требования к материалам конструкций, технологии и организации работ по их возведению, включая методики контроля качества и оценки состояния закрепленных выработок.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Transport of the USSR, 7/18/1990

SKU: RUSS143008

Price: $1,576.00



imgalt

The Product is Contained in the Following Classifiers:

Highways (Max) » Design, construction, repair and maintenance of artificial structures on roads » 18. Retaining walls and other special structures and types of work » 18.7. Tunnels on highways »

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of tunnels and subways »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.1 General requirements for use of subsoil »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.060 Tunnel construction »


The Document References:

GOST 10060-87: Concretes. Methods of frost resistance determination

GOST 10178-76: Portland cement and slag Portland cement. Specification

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.2-78: Concretes. Method of determination of moisture content

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 18105-86: Concretes. Rules for the strength control

GOST 21982-76: Commercial explosives. Water-proof safety ammonites. Specifications

GOST 21983-76: Commercial explosives. Uglenits. Specifications

GOST 21984-76: Commercial explosives. Water-proof ammonite No 6GW and ammonal. Specifications

GOST 21985-76: Commercial explosives. Splitted off ammonal № 1. Specifications

GOST 21986-76: Commercial explosives. Detonite M. Specifications

GOST 21987-76: Commercial explosives. Granulites. Specifications

GOST 23464-79: Cements classification

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 25192-82: Concretes. Classification and general technical requirements

GOST 26633-85: Heavy-weight and sand concretes. Specifications

GOST 310.1-76: Cements. Test methods

GOST 310.2-76: Cements. Methods of grinding fineness determination

GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness

GOST 310.4-81: Cements. Methods of tests of bending and compression strengths

GOST 310.5-88: Cements. Test method for heat of hydration

GOST 310.6-85: Cements. Method of water separation determination

GOST 450-77: Calcium chloride technical. Technical conditions

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5802-86: Mortars. Test methods.

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 7473-2010: Fresh concrete. Specifications

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods

GOST 8735-88: Sand for construction work. Testing methods

GOST 8736-85: Sand for construction work. Technical requirements

GOST 969-91: Alumina and high alumina cements. Specifications

GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications

SNiP 2.03.01-84: Concrete and reinforced concrete structures

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities

SNiP II-40-80: Metro

SNiP III-44-77: Railroad, Road, and Hydraulic Tunnels. Subways

SNiP IV-2-82: Price lists for the construction of buildings and structures for intersectoral purposes

VSN 126-78: Instructions for the use of anchors and nabryzgbetona as a temporary lining of the tunnels

VSN 193-81: Guidelines for development of programs of works execution on erection of construction structures

The Document is Referenced By:

ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways

ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning

ODM 218.4.022-2015: Recommendations for conducting geotechnical monitoring of road tunnels under construction and operation

SP 120.13330.2012: Subway systems

SP 122.13330.2012: Railway and highway tunnels

SP 32-105-2004: Subways

VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method

VSN 213-92: Technical instructions for the design and performance of blasting operations in the construction of tunnels and subways

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!