SNiP 2.01.09-91
СНиП 2.01.09-91
|
|
Buildings and constructions in undermine territories and collapsible soils
Здания и сооружения на подрабатываемых территориях и просадочных грунтах
Status: Not effective. The updated version of SP 21.13330.2012 “Buildings and structures in the undermined territories and subsidence soils” is in force
Standards apply to the design of buildings and structures erected on the undermined territories and subsiding soils. The requirements of these standards do not apply to the design of buildings and structures erected on the undermined territories of potash deposits, on sites for which deformations of the base from underworking cannot be determined, on underworked territories and subsiding soils in seismic areas, as well as on the design of hydraulic structures.
Нормы распространяются на проектирование зданий и сооружений, возводимых на подрабатываемых территориях и просадочных грунтах. Требования настоящих норм не распространяются на проектирование зданий и сооружений, возводимых на подрабатываемых территориях калийных месторождений, на площадках, для которых деформации основания от подработки не могут быть определены, на подрабатываемых территориях и просадочных грунтах в сейсмических районах, а также на проектирование гидротехнических сооружений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
9/4/1991
SKU: RUSS143251
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.22 Protection from dangerous geophysical effects »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.45 Foundations »
As a Replacement Of:
SNiP II-8-78: Buildings and Structures Constructed on Underworked and Subsiding Soils
The Document References:
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering
SNiP II-8-78: Buildings and Structures Constructed on Underworked and Subsiding Soils
The Document is Referenced By:
GOST R 22.2.13-2023: Safety in emergency situations. The procedure for developing a list of civil defense measures, measures to prevent emergencies of natural and man-made character. When designing capital construction facilities
GOST R 55201-2012: Safety in emergencies. Procedure for the development of a list of measures for civil defence, measures for prevention of natural and man-caused emergencies in capital construction design
Manual: Manual for impulse and low consumption fire extinguishing systems
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units
MDS 13-6.2000: Method for the Determination of Unfitness of Residential Occupancies and Dwelling Units for Occupation
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
PB 07-269-98: Rules for the protection of buildings and natural objects from the harmful effects of underground mining in coal deposits
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PB 12-245-98: Safety Requirements for Gas Supply Facilities
PB 12-368-00: Gas industry safety rules
PNAE G-14-038-96: Requirements to the report on justification of safety of radioactive wastes storage buildings in part of outer impacts account
RD 07-113-96: Procedural Guidelines to the Approval of Measures to Protect Buildings, Structures and the Environment Against Hazards Associated with Mining Works
RD 07-55-94: Procedural Guidelines for Preliminary Approval of Mining in Close Proximity to Railroads at Coal and Shale Deposits in Russia
RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 107: Provisional Regulations on the composition of measures to prevent emergencies in the special section "Engineering and technical measures of civil defense. Measures to prevent emergencies" of urban planning documentation of Moscow
SNiP 2.02.03-85: Pile foundations
SNiP 32-04-97: Railway and highway tunnels
SNiP 34-02-99: Underground Storage Facilities for Gas, Petroleum, and Their Products
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SP 11-104-97: Collection of rules for engineering surveys for construction. Engineering-geodetic surveys for construction
SP 11-105-97: Engineering and geological survey for construction
SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects
SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects
SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures
SP 122.13330.2011: Railways and highway tunnels
SP 123.13330.2011: Underground storages of natural gas, oil and processing products
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2011: Buildings and structures foundations
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures
SP 91.13330.2012: Underground mine workings
ST RK 1399-2005: Motor roads. Engineering surveys for construction, reconstruction, and capital repairs. Requirements for scope of work
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TSN 22-301-98: Buildings in the undermined territories of the Verkhnekamsk potash deposit. The purpose of construction protection measures. Perm region
TSN 50-306-2005: Foundations and foundations of increased bearing capacity. Rostov region
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
