Computer-aided design system. Automated systems. Directions for application
Системы автоматизации. Схемы автоматизации. Указания по выполнению. Пособие к ГОСТ 21.408-93
Status: Effective
This manual (RM) contains guidelines for the design of automation schemes and structural diagrams of control and control circuits included in the working documentation of automation systems (SA) according to the recommendations of GOST 21.408 and PM 4-59. These recommendations are also applicable to the development of these schemes at the “project (working draft)” stage, as well as for automation schemes and structural diagrams of control and management circuits when developing technical documentation for automated process control systems (APCS) according to GOST 34.201. When developing the RM, the requirements and recommendations of the standards approved after the release of GOST 21.408 were also taken into account. Recommendations manual in the development of SA objects, which are subject to the requirements of SNiP 3.05.07 and GOST 21.408. (For a refined list of objects, see PM 4-59, Appendix 2). For other objects, this manual is used to the extent that it does not contradict the special requirements of regulatory documents on the creation of CA of these objects.
Настоящее пособие (РМ) содержит методические рекомендации по проектированию схем автоматизации и структурных схем контуров контроля и управления, включаемых в состав рабочей документации систем автоматизации (СА) по рекомендациям ГОСТ 21.408 и РМ 4-59. Эти рекомендации применимы также при разработке указанных схем на стадии "проект (рабочий проект)", а также для схем автоматизации и структурных схем контуров контроля и управления при разработке документации технического обеспечения автоматизированных систем управления технологическими процессами (АСУТП) по ГОСТ 34.201. При разработке РМ учтены также требования и рекомендации стандартов, утвержденных после выхода ГОСТ 21.408. Рекомендации пособия при разработке СА объектов, на которые распространяются требования СНиП 3.05.07 и ГОСТ 21.408. (Уточненный перечень объектов-см. РМ 4-59, приложение 2). Для остальных объектов настоящее пособие применяют в той мере, в которой оно не противоречат специальным требованиям нормативных документов по созданию СА этих объектов
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS143572
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.01 Industrial automation systems in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.01 Electrical wires and cables in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
The Document References:
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 1508-78: Control rubber and plastic-insulated cables. Specifications
GOST 2.113-75: Group and main design documentation
GOST 2.303-68: Unified system for design documentation. Lines
GOST 2.304-81: Unified system for design documentation. Letters for drawings
GOST 2.305-68: Unified system for design documentation. Image - appearance, sections
GOST 2.306-68: Graphic legend of materials and the rules of their insertion on drawings
GOST 2.316-68: Unified system for design documentation. Rules for placing of inscriptions, technical data and tables on drawings
GOST 2.701-84: Unified system design documentation. Diagrams. Kinds and types. General requirements for fulfilment
GOST 2.710-81: Unified system for design documentation. Alpha-numerical designations in electrical diagrams
GOST 2.721-74: Unified system for design documentation. Graphical designations in schemes. Graphical symbols of general use
GOST 2.722-68: Unified system for design documentation. Graphic identifications in schemes. Electric machinery
GOST 2.732-68: Unified system for design documentation. Graphic identifications in schemes. Light sources
GOST 2.741-68: Unified system of design documentation. Graphical symbols in diagrams. Acoustic devices
GOST 2.780-68: Unified system for design documentation. Graphical identifications. Elements of hydraulic and pneumatic circuits
GOST 2.780-96: Unified system for design documentation. Graphic designations. Fluid conditioners and capacitors
GOST 2.782-68: Unified system for design documentation. Graphical identifications. Hydraulic and pneumatic pumps and motors
GOST 2.782-96: Unified system for design documentation. Graphic designations. Hydraulic and pneumatic machines
GOST 2.785-70: Unified system for design documentation. Graphic designations. Pipeline accessories
GOST 2.788-74: Unified system for design documentation. Graphic designations. Evaporating apparatus
GOST 2.789-74: Unified system for design documentation. Graphic designations. Heat exchangers
GOST 2.790-74: Unified system for design documentation. Graphic designations. Column apparatus
GOST 2.791-74: Unified system for design documentation. Graphic designations. Sumps and filters
GOST 2.792-74: Unified system for design documentation. Graphic designations. Drying apparatus
GOST 2.793-79: Unified system for design documentation. Graphic designations. Components and arrangements of machines and apparatus of chemical industry. General symbols
GOST 2.794-79: Unified system for design documentation. Graphic designations. Feeding and measuring devices
GOST 2.795-80: Unified system for design documentation. Graphic designations. Centrifuges
GOST 21.101-93: System of design documents for construction. rubber articles. General technical requirements. Main requirements for working documents
GOST 21.101-97: System of design documents for construction Main requirements for design and working documents
GOST 21.205-93: System of design documents for construction. Elements оf sanitary engineering systems - symbols
GOST 21.206-93: System of building design document. Pipelines. Symbols for presentation
GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.
GOST 21.404-85: System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams
GOST 21.408-93: System of design documents for construction. Rules of industrial process automation working documentation execution
GOST 21.606-95: System of design documents for construction. Rules for execution of working documentation of heat mechanical, solutions of boiler rooms
GOST 21.609-83: System of building design documents. Gas supply. Internal equipment. Working drawings
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 7.12-93: System of standards on information, librarianship and publishing. Bibliographic record. Abbreviation of words in the Russian language. General requirements and rules
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
RD 50-34.698-90: Methodological instructions. Information technology. Set of standards and guidelines for automated systems. Automated systems. Requirements for the content of documents.
RTM 36.22.8-90: Rules for the design of automation systems in TEO and project
SNiP 3.05.07-85: Automated systems
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.