SP 230.1325800.2015
СП 230.1325800.2015
|
|
Construction enclosing of buildings characteristics of thermal conductive of inclusions
Конструкции ограждающие зданий. Характеристики теплотехнических неоднородностей
Status: Effective - Introduced for the first time
This set of rules applies to the calculation of reduced resistance to heat transfer of fragments of building envelopes, specific heat losses through heat shielding elements and heat engineering homogeneity coefficient for residential or public, public, in
Настоящий свод правил распространяется на расчет приведенного сопротивления теплопередаче фрагментов ограждающих конструкций зданий, удельных потерь теплоты через теплозащитные элементы и коэффициента теплотехнической однородности, для строящихся или реко
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
4/8/2015
SKU: RUSS143620
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST R 53786-2010: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
SNiP 23-02-2003: Buildings Heat Insulation
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
The Document is Referenced By:
GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 59744-2021: Building envelope structures. Materials for embedded thermal insulating elements of extruded polystyrene foam (thermowells). General specifications
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
Order 1049/pr: On approval of Amendment N 2 to SP 230.1325800.2015 "Building envelopes. Characteristics of Thermal Inhomogeneities".
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 345.1325800.2017: Residential and public buildings. Thermal performance design
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 60.13330.2016: Heating, ventilation and air conditioning
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
|
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
