MGSN 2.08-01
МГСН 2.08-01
|
|
Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
Защита от коррозии бетонных и железобетонных конструкций жилых и общественных зданий. г. Москва
Status: Effective - Introduced for the first time
The standards were developed for the city of Moscow in accordance with the requirements of the head of SNiP 10-01 and are based on federal standards in construction — the head of SNiP 2.03.11, SNiP 2.08.01 and SNiP 2.08.02, as applied to the design of corrosion protection of concrete and reinforced concrete structures of residential and industrial buildings. public buildings being built, operated and reconstructed in urban environments. The standards do not apply: - to transport facilities, as well as facilities for health care and recreation, and health and fitness and sports facilities (as per SNiP 2.08.02); - to design protection against corrosion caused by stray currents and radioactive substances; - to protect concrete and reinforced concrete structures from special concrete (polymer concrete, acid resistant, heat resistant concrete).
Нормы разработаны для города Москвы в соответствии с требованиями главы СНиП 10-01 и базируются на федеральных нормах в строительстве - главе СНиП 2.03.11, СНиП 2.08.01 и СНиП 2.08.02, применительно к проектированию защиты от коррозии бетонных и железобетонных конструкций жилых и общественных зданий, строящихся, эксплуатируемых и реконструируемых в среде городской застройки. Нормы не распространяются: - на транспортные сооружения, а также сооружения для здравоохранения и отдыха и на физкультурно-оздоровительные и спортивные сооружения (по СНиП 2.08.02); - на проектирование защиты от коррозии, вызываемой блуждающими токами и радиоактивными веществами; - на защиту бетонных и железобетонных конструкций из специальных бетонов (полимербетонов, кислотостойких, жаростойких бетонов).
Choose Language:
Format: Electronic (pdf/doc)
Approved: The government of Moscow,
2/4/2003
SKU: RUSS143707
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of Moscow »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12812-80: Liquid thiokols
GOST 13489-79: Sealants, marks У-30M and УТ-31. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 28196-89: Water-dispersion paints
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8292-85: Oil and paste color paints
GOST 8736-93: Sand for construction works. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 969-91: Alumina and high alumina cements. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
MGSN 3.01-01: Residential buildings
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SP 23-101-2000: Design of thermal performance of buildings
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TSN 50-304-2001: Basements, foundations, and underground constructions
The Document is Referenced By:
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
TR 013-1-14: Technical recommendations on the use of non-metallic composite reinforcement of a periodic profile in concrete structures
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.