ODM 218.2.026-2012
ОДМ 218.2.026-2012
|
|
Design and calculation guidelines for pile-anchor structures of highways
Методические рекомендации по расчету и проектированию свайно-анкерных сооружений инженерной защиты автомобильных дорог
Status: Effective - Introduced for the first time. Has a recommendatory nature
Sectoral road methodical document is intended for use by road authorities and organizations that carry out work on the calculation, design, construction and maintenance of pile-and-anchor structures on highways. Recommendations of the methodological document apply to the design of pile-anchor structures engineering protection of roads. They can be used in the construction of structures on highways in areas with seismicity up to 9 points inclusive on the scale of the IZP-64 (MSK-64). Recommendations of the methodological document do not apply to permafrost, karst areas, as well as to the design of hydraulic structures and special structures of civil defense and emergency situations. The methodical document contains materials that are intended both for informing specialists and for practical activities, and these materials make it possible to develop specialized recommendations for specific technologies for constructing pile-anchor structures. In this case, the question of the advisability of using recommendations should be decided in each specific case by individually qualified specialists.
Отраслевой дорожный методический документ предназначен для использования органами управления автомобильных дорог и организациями, вьполняющими работы по расчету, проектированию, строительству и содержанию свайно-анкерных сооружений на автомобильных дорогах. Рекомендации методического документа распространяются на проектирование свайно-анкерных сооружений инженерной защиты автомобильных дорог. Они могут использоваться при строительстве сооружений на автомобильных дорогах в районах с сейсмичностью до 9 баллов включительно по шкале ИФЗ-64 (МSК-64). Рекомендации методического документа не распространяются на районы вечной мерзлоты, карста, а также на проектирование гидротехнических сооружений и специальных сооружений гражданской обороны и чрезвычайных ситуаций. Методический документ содержит материалы, которые предназначены как для информирования специалистов, так и для практической деятельности, причем эти материалы дают возможность разрабатывать специализированные рекомендации для конкретных технологий устройства свайно-анкерных сооружений. При этом вопрос о целесообразности использования рекомендаций должен решаться в каждом конкретном случае индивидуально квалифицированными специалистами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Highway Agency,
10/9/2012
SKU: RUSS143774
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
12. Repair, maintenance, operation of roads »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics
GOST 20276-99: S o i l s. Methods for field determination of strength and strain characteristics
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8734-75: Seamless steel tubes cold deformed. Range
ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads
SNiP 2.02.03-85: Pile foundations
SNiP 3.04.01-87: Insulation and finishing coatings
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 24.13330.2011: Pile foundations
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
VSN 506-88: Design and construction of ground anchors
The Document is Referenced By:
ODM 218.2.038-2014: Guidelines for the overhaul and reconstruction of retaining walls and retaining structures
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
